IMS Wet Emergency Chlorine Scrubber Systems are designed to contain and treat accidental releases of chlorine gas. Systems are offered to treat up to 3 tons of chlorine gas. The IMS wet emergency chlorine scrubber is a three-stage single-pass chemical absorption system with very high efficiency horizontal packed bed sections. An induced draft fan pulls the chlorine gas through the scrubber, where it contacts a recirculation caustic solution. The scrubber system is factory pre-assembled, complete with induced draft fan, recirculation pump, instrumentation and controls.
The AquaPrime system utilizes a disk configuration and the exclusive OptiFiber® cloth filtration media to effectively filter screened, de-gritted, raw municipal sewage. This proven technology easily handles significantly higher solids loading rates compared to secondary clarified effluent (by a factor of 3 to 5 times) with the added ability to sustain a low TSS concentration, making it an ideal solution for both wet weather treatment and primary treatment in lieu of conventional sedimentation systems.
Ozone treatment for water and wastewater has been utilized successfully for several decades and continues to be a viable disinfection solution for both municipal and industrial plants, worldwide.
SureSafe™ Filter Cartridges will inhibit the growth of Legionella on your filter cartridges. Silver has been used to help sanitize liquids for more than 4,000 years. Permanent Silver Zeolite fibers are used to manufacture HARMSCO® SureSafe™ Filtration Media which inhibits the growth of biofilms on and in the filtration media.
The CoMag® System settles floc up to 30 times faster than conventional flocculation treatments, enabling plants to increase capacity and clarifier performance. It helps meet tighter regulations within existing tankage and smaller treatment volumes than alternative technologies, allowing facilities to reduce plant investment costs for upgrades.
VigorOx® WWT II is a strong wastewater disinfectant for use in wastewater treatment that can replace chlorine or improve the performance of a UV system. VigorOx WWT II, a peracetic acid (PAA)-based formulation, is an equilibrium mixture of acetic acid (vinegar), hydrogen peroxide and water.
The MicroDPD® analyzer uses proven DPD colorimetric technology for monitoring chlorine in both municipal and industrial applications. The instrument can measure free or total chlorine in drinking water, wastewater and seawater.
The Automatic Switchover system Series 1041 provides safe, reliable switching between two gas (pressure or vacuum) or two liquid (pressure or level) sources assuring an uninterrupted supply of chemical to the application. Automation of all functions (switchover, system initialization, configuration, lamp test, and safety functions) is done with an internal programmable logic controller for operational flexibility, enhanced reliability, and ease of use. If needed, local manual override is conveniently available for operator control to maintain continuous operation.
The Series 1520 CHLOR-A-VAC® affords high efficiency addition and mixing of gases and liquid chemicals resulting in substantial chemical cost savings.
The Series 1420 CHLOR-A-VAC® affords high efficiency addition and mixing of gases and liquid chemicals resulting in substantial chemical cost savings.
|
|
|
|
|
|
|
|
|