Wastewater Collection Systems Products

  1. Dissolved Air Flotation (DAF)
    9/10/2015

    Headworks has designed and manufactured DAFs (Dissolved Air Flotation) for many years for the cruise ship industry where the primary goal is always to operate on a small footprint.  As cruise ships can’t simply call a plumber when there is a problem, reliability of the equipment is paramount as well. It was, therefore, only a natural progression for us to expand the line into land based applications. In combination with our MBBR/IFAS solutions Headworks’ DAFs provide a super compact complete core treatment system.

  2. RollsAIR Extended Aeration Systems
    8/26/2015

    RollsAIR™ & RollsAIR™ HS-STP®: Offering versatility and consistent high performance for multi-family residential and large commercial properties. The RollsAIR™ and the RollsAIR™ HS-STP® offer a cost effective method to treat larger flows for a multitude of applications.

  3. Sludge Sucker
    7/23/2015

    The Sludge Sucker™ unit is a cable-driven sludge removal mechanism that provides cost-effective and efficient removal of lightweight sludges, such as alum or ferric hydroxide, or light iron and manganese precipitates from rectangular settling basins.

  4. ROMAG™ CSO Screen
    7/23/2015

    The ROMAG RSW CSO Screen, fitted between the discharge culvert and the relief sewer, reliably retains all visible solids during peak events.

  5. RapiSand™ Ballasted Flocculation System
    7/23/2015

    The WesTech RapiSand™ ballasted flocculation system is a high-rate clarification process combining rapid mixing and multi-stage flocculation, followed by sedimentation. RapiSand™ sedimentation is extremely fast and can be applied in a wide variety of suspended solids removal applications.

  6. Wipes Ready Technology
    4/30/2015

    Are you wipes ready?
    Wipes and rags are clogging pumps and damaging wastewater treatment systems. NEW Wipes Ready technologies from JWC will keep your systems running efficiently.

  7. 10K Series Muffin Monster
    4/27/2015

    The 10K Series Muffin Monster is a compact grinder, tough on solids in sludge and sewage applications. It fits into areas with limited space requirements while still providing the necessary power for downstream protection. This simplified design makes it a best cost solution to your sludge and sewage pumping problems.

  8. Small Tank Mixing
    4/2/2015

    Small tank mixing is a lower cost, simplified Rotamix system, using a Chopper Pump and external-mount nozzle assemblies. The external-mount nozzles are sandwiched between 6" ANSI flanges and provide fixed discharge angles off the tank wall.

  9. 3-Way Valve
    4/1/2015

    The 3-Way Valve is available in 4”, 6” and 8” sizes and is available as a stand-alone valve or as part of a Vaughan submersible or vertical wet-well Chopper Pump. The valve is a non-plug design using a rotatable CD-4MCu valve disc to allow discharge out of either of the top ports.

  10. Turbo Mixer
    4/1/2015

    Vaughan’s Turbo Mixer is a propeller mixer mounted vertically inside an 18” elbow. This mixer has replaced many submersible propeller mixers which have experienced motor or gearbox failure due to fluid inleakage. The Turbo can mix a pit with only one foot of liquid above the floor, something a horizontal shaft submersible mixer cannot do.