Vaughan Company Products

  1. Turbo Mixer
    4/1/2015

    Vaughan’s Turbo Mixer is a propeller mixer mounted vertically inside an 18” elbow. This mixer has replaced many submersible propeller mixers which have experienced motor or gearbox failure due to fluid inleakage. The Turbo can mix a pit with only one foot of liquid above the floor, something a horizontal shaft submersible mixer cannot do.

  2. Hydraulic Submersible Centrifugal Chopper Pumps
    12/6/2005
    Vaughan's hydraulic submersible centrifugal chopper pumps are used in vane or piston hydraulic motors...
  3. Submersible Recirculator Centrifugal Chopper Pump
    7/12/2000
    All 3 inch through 6 inch Vaughan Electric Submersible Centrifugal Chopper Pumps are available with a recirculating nozzle option for pre-mixing and recirculation of pits prior to pump out
  4. Hydraulic Submersible Centrifugal Chopper Pump
    7/16/2000
    Vaughan's Hydraulic Submersible Centrifugal Chopper Pump is available in 3" through 12" discharges, with flows from 50 GPM to over 7000 GPM and heads up to 280 feet
  5. Cantilever Centrifugal Chopper Pumps
    12/6/2005
    Vaughan's cantilever centrifugal chopper pumps have large 4" shafting, no submerged seal or bearings...
  6. Self-Priming Centrifugal Chopper Pumps
    12/6/2005
    Vaughan's self-priming centrifugal chopper pumps are available in 4" and 6" designs and are guaranteed non-clogging pumps...
  7. 8-10” Self-Priming Centrifugal Chopper Pumps
    12/6/2005
    Vaughan's 8" to 10" self-priming centrifugal chopper pumps are the world's largest centrifugal self-priming chopper pumps...
  8. Triton® Screw Centrifugal Pumps
    6/2/2008

    Vaughan Company With over 50 years of solids handling experience, introduces the TRITON Screw Centrifugal Pumps.  Combining the benefits of Vaughan’s superior pump designs with the advantages of high efficiency in a non-clog design.  The TRITON Screw Centrifugal impeller is ideal for handling thick sludges, large or stringy solids, shear sensitive fluids and delicate or highly abrasive materials.

  9. Vertical Dry Pit Centrifugal Chopper Pump
    4/2/2001
    The Vaughan Vertical Dry Pit Centrifugal Chopper Pump is available in 3" through 12" discharges, with flows from 50 GPM to over 7000 GPM and heads up to 280 feet
  10. Horizontal End Suction Centrifugal Chopper Pumps
    12/6/2005
    Vaughan's horizontal end centrifugal suction chopper pumps come in a "flushless" mechanical seal or a standard combined bearing frame flushed...