Sewers and Sewer Line Maintenance Products

  1. Orenco Sewer
    7/21/2017

    Wastewater Collection System

    Orenco Sewer™ (effluent-only sewer) is a cost-effective, environmentally sound wastewater collection system. With an Orenco Sewer, raw sewage flows from a house or business to a watertight underground tank. Only the filtered liquid portion is discharged (by either pump or gravity) to shallow, small-diameter collection lines that follow the contour of the land. Solids remain in the underground tank for passive, natural treatment and only need to be pumped every 10 to 12 years (depending on the number of residents and the tank volume).

    Orenco Sewers take significantly less time to install than conventional sewers. And in an Orenco Sewer, material and excavation costs are reduced because the inexpensive collection lines are shallowly buried just below the frost line. Because only liquid is being pumped, system designers don’t need to worry about minimum velocities and associated grades. This simpler installation process causes less disruption to communities and allows businesses to operate normally during construction.

  2. H-306HP Fabricated Steel Tapping Sleeve
    6/12/2017

    Mueller Co. recently announced a new H-306HP fabricated steel tapping sleeve. Designed for hot tapping ductile iron pipe and thick-wall C900 plastic pipe, the H-306HP is made from A36 fabricated steel and meets the requirements of AWWA C223. It features an integral bolt flange, Rilsan nylon coating, working pressures up to 300psi, and is available sizes from 4”-16”. The H-306HP is an economical tapping sleeve ideally suited for use with Mueller® CL-12, C1-36, and Mega-Lite drilling machines in less corrosive soil environments.

  3. SCOUT Hydro Profiling System
    1/4/2017

    The Reliant Water Technologies SCOUT Hydro Profiling System is the answer to obtaining clear and concise shallow water survey data quickly and inexpensively. By not only providing a visual hydrographic ‘picture’ of everything underwater, in any shallow body of water, the SCOUT also provides the volume of sludge in the water body (as well as the volume of free water). The ‘picture’ provided is color enhanced in order to provide clear, definitive delineation of variable depths of sludge, or debris, and includes multi-point water depth over-lays.

  4. The Wet Well Wizard
    11/2/2015

    The Wet Well Wizard is the only ‘one-size-fits-all’ wet well aeration system that has no moving parts, is completely non-corrosive, is simple to install, and utilizes no electricity underwater. It can be installed in 30 minutes and requires almost no maintenance.

  5. Hydro-Guard® HG-6
    6/23/2014

    The Hydro-Guard® HG-6 Hydrant Automatic Flushing System takes automatic and programmable flushing capabilities anywhere in the water distribution system where a fire hydrant is available.

  6. Hydro-GuardĀ® HG-8 Automatic Flushing System
    5/13/2014

    Designed to increase chlorine residual consistency in potable water systems, Mueller® has added the HG-8 model to the expanding line of Hydro-Guard® Automatic Flushing Systems. Hydro-Guard HG-8 is installed below the frost-line, with all components easily accessible from the ground surface in the Mueller Thermal-Coil® Box. Dechlorinated discharge water is directed to the storm water drainage system or local retention pond. In addition, the product is designed to accept a 1-inch meter.

  7. Mighty MikeĀ® Maintenance Tablets
    1/21/2014

    Maintain your drain with Mighty Mike® specialty tablets and cleaners!

  8. SewerGard 210 For Ultra-Corrosive, Industrial Wastewater Environments
    9/5/2013

    Sauereisen SewerGard Industrial No. 210 is a novolac epoxy that is specifically formulated for industrial wastewater environments where plants and refineries treat contaminated water before it is sent to a municipal wastewater treatment plant.