Pumps and Drives Solutions

  1. MCC Cast Iron Pumps With 316 Stainless Steel Impellers 7/21/2020

    End Suction Centrifugal Pumps, and G&L Series MCC

  2. e-SV Series Stainless Steel Vertical Multi-Stage Pumps 7/21/2020

    The e-SV fabricated vertical multi-stage pump is an energy saving, non-priming pump coupled to a standard premium-efficient motor. It’s built to withstand a variety of, mechanically aggressive and high temperature liquids, and is designed to extend uptime and help reduce lifecycle costs in a wide range of demanding applications.

  3. VIC – Canned Lineshaft Turbine Pumps 7/21/2020

    Multistage canned vertical turbine pumps offer the same versatility and performance as our lineshaft pumps and are ideal for closed-loop boosting. These are short-set lineshaft pumps with suction piping connected to a can (or sleeve) inlet, which allows the can to create the pump reservoir. A canned turbine pump is a perfect solution for site locations where suction piping exists, rather than an existing sump or reservoir.

  4. Aquavar IPC Variable Speed Controller 7/21/2020

    Aquavar IPC Variable Speed Controller is optimized for pumps in submersible and ground water applications. It adds capabilities including multi-pump configuration and remote monitoring.

  5. VIT – Short Set Lineshaft Turbine Pumps 7/21/2020

    Multistage lineshaft vertical turbine pumps are ideal for wet pit or open sump pumping. Lineshaft vertical turbines are configured such that the hydraulic components are submerged into the pumped fluid while the motor is located above ground, making it easy to access electrical components.

  6. Smart Pump Range (e-SVE/e-HME Smart Pumps) 7/21/2020

    Start with the new e-SVE and e-HME Smart Pumps from Goulds Water Technology

  7. ICS/ICSF Stainless Steel Pumps 7/21/2020

    Open Impeller 316 Stainless Steel End Suction Pumps

  8. Variable & Fixed Speed Pump Controllers 7/21/2020

    Since 1997, Xylem’s Goulds Water Technology and CentriPro brands have been providing variable speed pump control solutions to its customers. The first product was the AQUAVAR® variable speed controller.

  9. VIS – Submersible Vertical Turbine (Borehole) Pumps 7/21/2020

    Ideal for deep set applications where use of lineshaft pumps is impractical. Complete unit is installed underground resulting in space-saving, quiet operation. Long life / low maintenance – no lubrication, alignment.

  10. Hydrovar 7/21/2020

    Hydrovar is the intelligent pump controller that matches the performance to system demand. The Hydrovar is easily mounted directly on the motor of the pump and will fit on any standard TEFC NEMA motor. This makes the Hydrovar an excellent choice for retrofitting and upgrading of fixed speed systems. There’s no need for an external control panel when using Hydrovar.