Pumps and Drives Solutions

  1. VIT – Short Set Lineshaft Turbine Pumps 7/21/2020

    Multistage lineshaft vertical turbine pumps are ideal for wet pit or open sump pumping. Lineshaft vertical turbines are configured such that the hydraulic components are submerged into the pumped fluid while the motor is located above ground, making it easy to access electrical components.

  2. ICS/ICSF Stainless Steel Pumps 7/21/2020

    Open Impeller 316 Stainless Steel End Suction Pumps

  3. DWT – Deep Well Turbine (Borehole) Pumps 7/21/2020

    Multistage lineshaft vertical turbine pumps are ideal deep well pumping. Lineshaft vertical turbines are configured such that the hydraulic components are submerged into the pumped fluid while the motor is located above ground, making it easy to access electrical components.

  4. e-SH 316 Stainless Steel End Suction Centrifugal Pump 7/21/2020

    Increased Efficiency and Proven Performance for a Range of Applications

  5. Aquavar IPC Variable Speed Controller 7/21/2020

    Aquavar IPC Variable Speed Controller is optimized for pumps in submersible and ground water applications. It adds capabilities including multi-pump configuration and remote monitoring.

  6. Aquavar e-ABII 7/21/2020

    Think of it as “Cruise Control” for your pump. The Aquavar e-ABII pump controller provides an economical answer for municipal and private water systems with low water pressure. Both domestic and light commercial above ground boosters can benefit.

  7. 3742 Cast Iron & Bronze Pumps 7/21/2020

    ½ to 3 HP Frame-Mounted Centrifugal Pumps G&L Series 3742.

  8. LB Booster Pump 7/21/2020

    Booster Pumps G&L Series LB

  9. 5”-11” Pre-Engineered Submersible Turbine Pumps 7/21/2020

    Pre-engineered catalog of 5-11” submersible pump models in Goulds Water Technology standard pump materials, created for ease of selection.  Submersible pumps are ideal for deep set applications where use of lineshaft pumps is impractical. Complete unit is installed underground resulting in space-saving, quiet operation. Long life / low maintenance – no lubrication, alignment.

  10. VIC – Canned Lineshaft Turbine Pumps 7/21/2020

    Multistage canned vertical turbine pumps offer the same versatility and performance as our lineshaft pumps and are ideal for closed-loop boosting. These are short-set lineshaft pumps with suction piping connected to a can (or sleeve) inlet, which allows the can to create the pump reservoir. A canned turbine pump is a perfect solution for site locations where suction piping exists, rather than an existing sump or reservoir.