Product Showcase

  1. Submersible A Series Wastewater Pumps
    9/13/2017

    HOMA submersible water and wastewater pumps operate worldwide in numerous domestic, municipal and industrial applications. Over 60 years of experience in the design and manufacturing of submersible pumps, plus uncompromising attention to quality with our ISO9001 compliance, ensure the utmost reliability and long service life of all HOMA products.

  2. HOMA Grinder Pumps (GRP Series)
    9/13/2017

    The goal of a grinder pump is to process solids, making them small enough to pass through the pump and discharge line without plugging. While most grinder pumps effectively compress the solids as they pass through the pump, permitting compressed stringy solids to reside in the pump when the unit is turned off, the HOMA grinder takes a different approach. Solids are processed with a dual-action cutter operating outside of the pump, below the impeller. The unique hardened cutter system is manufactured in stainless steel alloyed with cobalt, vanadium, and molybdenum. Both stationary and rotational cutters are hardened to a minimum of 55 Rockwell C and provide 13,800 cuts per minute.

  3. HOP.SEL HOMA Pump Selection
    9/13/2017

    HOP.SEL is a valuable tool in finding the right HOMA product for your pump application.  HOP.SEL provides an interactive catalog and can offer pump recommendations based on application conditions defined by the user. 

  4. HRS Submersible Mixers
    9/13/2017

    HOMA submersible mixers are used in various applications - homogenization, suspension of solids, flow generation, freeze prevention and other mixing or flushing duties. Fibrous solids in the medium are particularly challenging because they lead to entanglement/fouling in the propeller area that can seriously impair the performance of the mixer.

  5. UV Package Plant
    9/5/2017

    Calgon Carbon UV Technologies is pleased to introduce the C3500D/PS Packaged System for UV Wastewater Disinfection. This product uniquely addresses the needs of smaller communities with effluent flows of less than 2.6 million gallons a day.

  6. Alignment Gauge Kits Allow for Textbook Valve Cartridge Insertion
    9/1/2017

    The Hydra-Stop 4” – 8” and 10” – 12” Alignment Gauge Kits allow Hydra-Stop Insta-Valve equipment owners increased crew safety and productivity by simplifying the valve cartridge alignment process.  In three steps – align the cartridge, set the depth, and lock the cartridge in place – users can swiftly setup for final cartridge insertion.  No guessing or measuring required.  Reliable and repeatable valve insertions every time. 

  7. 4-12 Inch Insta-Valve 250 Patriot Insertion Valve
    9/1/2017

    The Insta-Valve 250 Patriot insertion valve provides an immediate control point in distribution systems, without using a system-wide shut down.  Installed under pressure, up to 250 psi, the Insta-Valve 250 Patriot increases operator safety, limits environmental impact, and saves up to 100% of the costs related to system shutdown.

  8. Hydra-Q.I.K – Quick Install Kit
    9/1/2017

    Designed exclusively for Hydra-Stop Insta-Valve Installation Equipment.

  9. Hydra-Core Pipe Wall Sampling Kit
    9/1/2017

    Confirm inner pipe diameter in minutes.

  10. HSF 250 Patriot Series Line Stop Fitting
    9/1/2017

    The re-designed 4-12 inch Hydra-Stop HSF 250 Patriot Line Stop fitting is a step forward in line stopping technology. Installed at pressures up to 250 psi, the HSF 250 line stop fitting delivers benefits, which save time, increase safety, and eliminates up to 100% of the costs associated with system shutdowns.