PFAS Solutions

1. Purofine™ PFA694EBF Buffered Resin For PFAS Treatment: Point-Of-Use (POU) And Point-Of-Entry (POE) 8/10/2026

   Traditional ion exchange media can disrupt water chemistry and increase pipe corrosion risks during startup. Buffered treatment solutions stabilize pH and mineral ratios immediately, delivering consistent, safe performance across intermittent residential usage.

2. PFAS-Selective Single-Use Ion Exchange Resin: Environmental Discharge And Remediation 8/10/2026

   Effective PFAS remediation demands precise prefiltration, controlled hydraulics, and optimized vessel configurations to prevent media fouling and premature contaminant breakthrough. Read the guide to implement best practices for maximum treatment efficiency.

3. PFAS-Selective Single-Use Ion Exchange Resin For Drinking Water Systems 8/10/2026

   Achieving reliable drinking water decontamination using selective single-use ion exchange media requires careful hydraulic management, targeted prefiltration, and proper lead-lag vessel engineering to protect media integrity, prevent premature breakthrough, and maintain consistent effluent quality.

4. Purolite™ Purofine™ PFA694E 4/29/2026

   Purolite Purofine PFA694E is the flagship PFAS-selective single-use ion exchange resin for drinking water and other PFAS remediation applications.  This proven product provides better short chain removal, smaller footprint, and significantly lower operational cost than competitive technologies. 

5. DEXSORB® Regeneration And Concentration Of PFAS Waste 4/2/2026

   DEXSORB is a regenerable adsorbent media offering a cradle-to-grave solution in per- and polyfl uoroalkyl substances (PFAS) treatment. Effective desorption of PFAS from spent media is not only a critical step for enabling sustainable media reuse, but also for concentrating PFAS waste for its safe and cost-effective destruction.

6. DEXSORB® For PFAS And Organic Micropollutants 4/2/2026

   DEXSORB is a novel adsorbent made from crosslinked β-cyclodextrin polymers. The media features uniform 0.78 nm hydrophobic cavities that selectively adsorb organic contaminants in the 150 – 1000 Dalton molecular weight range. DEXSORB is available in two formulations to adsorb (A) PFAS exclusively, or (B) PFAS + organic micropollutants (OMPs) in combination. While DEXSORB and GAC operate by the same mechanism of adsorption, and share similar physiochemical properties, DEXSORB possesses multiple properties that provide for superior PFAS removal and waste handling.

7. Aries Pro PFAS Removal Filters 3/18/2026

   Aries Pro 3612 Series are WQA Gold Seal certified point-of-use filters engineered for residential PFAS removal — delivering clean, safe drinking water where it matters most.

8. Hydra Total PFAS Reduction System 3/12/2026

   The Hydra Total PFAS Reduction System delivers a sophisticated, pre-configured point-of-use water treatment solution meticulously engineered to combat the growing threat of PFAS contamination in residential and commercial water supplies. This advanced filtration system represents the culmination of ResinTech’s industry-leading research and development, offering unparalleled protection against these persistent environmental contaminants.

9. SIR-110-MP-HP (PFAS Removal) 3/12/2026

   ResinTech SIR-110-MP-HP is a WQA Gold Seal certified macroporous resin engineered for short-chain PFAS removal and optimized for highertemperature drinking water applications.

10. SIR-110-HP (PFAS Removal) 3/12/2026

    ResinTech SIR-110-HP is a WQA Gold Seal certified gel resin engineered for longchain PFAS removal, purposebuilt for residential drinking water applications.