Solutions For The Power Generation Industry

  1. Real-Time Water Quality Data For Industrial Operations 9/28/2020

    We arm plant operators with actionable data necessary to make informed decisions about water management in industrial facilities.

  2. In-Line Ultrasonic Meters Provide Continuous Measurement For Sample Stations 5/14/2020

    Boilers, cooling towers, and reverse osmosis (RO) systems are some of the most common systems that require monitoring and chemical treatment.  Chemical treatment of boiler systems reduces scale, corrosion, and other mineral deposits. This enables the system to run more efficiently, keep heat transfer rates high and fuel costs down. To determine the proper amount of chemical to be injected into the water stream, samples of key parameters need to be taken. Instrumentation to measure ORP, pH, conductivity, temperature, pressure and flow are deployed to take these measurements.

  3. Pista® Sand Removal Chamber 3/2/2020

    Applied successfully in thousands of water and sewage treatment schemes on all continents, the PISTA® Sand Removal Chamber serves as the efficient choice for 95 percent sand removal at water treatment plant intakes, power-gen water intakes and similar sand removal applications.

  4. PROflex™ Reverse Osmosis Systems 5/3/2019

    SUEZ has delivered over 1000 PRO Series Reverse Osmosis (RO) systems since its launch over a decade ago. The PRO has always been known as a rugged, industrial RO, capable of delivering consistent product water over years of operation. The PROflex line originated in feedback from our many customers on how to make the PRO even better.

  5. Pile Cloth Media Filtration For Clean Utilities 4/15/2019

    Cooling towers and boilers consume the most fresh water in the industry, with industrial process waters carrying the balance. Power plants and refineries use more water volume for the cooling process than any other area of the facility. Mining and food and beverage industries consume higher volumes for their processes. Clean water may come from a range of sources, including clarified surface waters, groundwater or properly treated wastewater (reuse) sources.

  6. Filter Installations Remove Solids From FGD Scrubber Effluent 4/9/2019

    Power plants and refineries around the world must manage and treat complex effluent waste streams from the Flue Gas Desulfurization (FGD) process. Flue gas is generated by the combustion process of fossil and fossil-derived fuels, such as coal, oils, and natural gas in power plants. Petrochemical refineries may generate flue gas from a number of different processes, including Catalytic Cracking, Steam Methane Reforming, and Heaters or Furnaces.

  7. Cloth Media Filtration Removes Coal Ash And Coal Fines At Power Plants 1/15/2019

    Coal-fired power plants generate coal fines and coal ash from a number of sources, including coal combustion residuals (CCR), particularly fly and bottom ash from coal furnaces, and coal pile runoff during rain events. In support of an industry-wide effort to reduce, improve, and remove coal ash ponds, a variety of technologies have been tested and employed. Read the full application note to learn more.

  8. Pista® Sand Removal Chamber For Power Plants 1/15/2019

    After pioneering the first flat-floor forced vortex grit chamber, S&L continues to lead the industry in advanced hydraulic grit removal research and development by emphasizing a combination of CFD analysis and field testing. The state-of-the-art PISTA® brand is the most-specified in North America.

  9. Digital Solutions For Water 8/2/2018

    ABB uses digital solutions to drive outcomes. Engaging customers to demonstrate tangible results that scale.

  10. ABB Ability™ Symphony® Plus For Water And Wastewater 8/2/2018

    The new generation of ABB’s total plant automation: DCS and SCADA for the power and water industries.