Drinking Water Treatment Products

  1. Water Quality - D.O. Impaired Waterways
    12/10/2010
    Conventional aeration systems elevate D.O., but at prohibitively high energy costs and with limits to the D.O. boost that can be achieved.
  2. AquaSorb® Activated Carbons For Water Treatment
    12/17/2013

    Granular, powdered and extruded activated carbons for the primary treatment of water, recovery and recirculation of process liquors, and treatment of waste liquid streams. The AquaSorb® range of activated process water treatment carbon is manufactured from coal, coconut shell and wood raw materials through steam or chemical activation. Jacobi Carbons offers a supply of AquaSorb® in a range of granular, extruded (pelletised) and ground powder forms, which are specifically designed for use in the liquid phase adsorption systems. From use in large municipal treatment facilities, to small domestic use cartridges, AquaSorb® is synonymous with high efficiency, extended life and cost-effective solutions.

  3. Spectroquant® Prove Spectrophotometer
    6/10/2016

    Simplify water analysis with a new class of spectrophotometers.

  4. TAK Smart™ UV System: Validated Disinfection Performance For Small Treatment Plants
    10/7/2011

    Cost effective UV disinfection with minimal operator involvement.

  5. AquaDisk® Cloth Media Filtration System
    1/10/2005

    Cloth media filters are designed for a variety of tertiary treatment applications

  6. CT5100 Continuous Gas Analyzer
    5/26/2016

    Rosemount CT5100 continuous gas analyzer from Emerson is the world’s only hybrid analyzer to combine Tunable Diode Laser (TDL) and Quantum Cascade Laser (QCL) measurement technologies for process gas analysis and emissions monitoring. The CT5100 is available in two variants: a certified system, housed in a purged and pressurized enclosure for hazardous area installations; and a non-certified system for use in nonhazardous areas. Both can house up to six lasers to measure up to 12 critical component gases and potential pollutants simultaneously within a single system - meeting local, state, national, and international regulatory requirements. The CT5100 is a unique combination of advanced technology, high reliability, and rugged design. Its "laser chirp" technique expands gas analysis in both the near- and mid-infrared range, enhancing process insight, improving overall gas analysis sensitivity and selectivity, removing cross interference, and reducing response time. The laser chirp technique produces sharp, well-defined peaks from high resolution spectroscopy that enable specificity of identified components with minimum interference and without filtration, reference cells, or chemometric manipulations.

  7. Microfiltration Performance That Maintains Wine Quality
    8/24/2011

    3M Liqui-Flux - Modules are available in a wide variety of sizes and materials to meet various needs in beverage clarification.

  8. Leopold® Clari-DAF® BWT System
    4/9/2012
    The Leopold® Clari-DAF® BWT (Backwash Water Treatment) system is a proven and highly effective method of treating spent filter backwash water for achieving the safe reuse recovery of as much as 99.7% of filter backwash water volume or returning it to the environment while lowering your total cost of operation.
  9. Model 4200 Gas Vacuum Chemical Feeder
    12/13/2011

    The JCS Industries Model 4200 Gas Vacuum Chemcial Feeder mixes and feeds gaseous chemicals commonly used for water and wastewater disinfection accurately, reliably and safely.

  10. Capital Controls® CHLOR-A-VAC® Series 1420 Chemical Industion Unit
    10/15/2015

    The Series 1420 CHLOR-A-VAC® affords high efficiency addition and mixing of gases and liquid chemicals resulting in substantial chemical cost savings.