Drinking Water Measurement Application Notes
-
Leak Detection On Water Distribution Network Using Clamp-On Flowmeters
5/22/2023
A global engineering company realized that their leak identification methods were time consuming and expensive, and so began to explore alternative solutions, such as ultrasonic flow meters.
-
Drinking Water Testing By Ion Chromatography Using Ultrapure Water
9/29/2022
This application note demonstrates the suitability of ultrapure water produced by a Milli-Q IQ 7000 water purification system for the IC analyses of inorganic ions and DBPs in drinking water.
-
Dosing Of Sodium Hypochlorite Solution For Drinking Water Disinfection
9/22/2022
A water purveyor was in urgent need of a chemically resistant flow instrumentation with a long life of service that allowed reliable and long-term stable dosing of the sodium hypochlorite solution.
-
LC-MS Analysis Of PFAS Compounds In EPA 533 After Supelclean™ ENVI-WAX SPE Cleanup
8/29/2022
This application note demonstrates the extraction and subsequent analysis of 25 related analytes from water using Supelco SPE cartridges.
-
Reduce Or Eliminate Water Hammer With Valve Positioners
5/19/2022
Water hammer, which can occur in just about any pumping system and even steam systems, can lead to pipe breakage, equipment damage or even total system failure. Addressing water hammer at the source is the savviest and most cost-effective way to handle the issue.
-
Take Control Of Your Water Distribution Network With Digitalization And Remote Monitoring
5/19/2022
Any process plant constantly generates a high volume of status data. Today, this data can be extracted from the plant, stored, analyzed, and prepared to meet operator needs and lower marginal costs.
-
Simplify And Optimize Your Process With Level And Pump Control
3/1/2022
Level controllers have evolved to meet today’s environmental challenges and industry demands. Learn how they support improved process management and, ultimately, a better bottom line.
-
Scrubber Application
1/27/2022
This customer supplies district heating and electricity for the region of Sønderborg. For one of their waste applications a MAG meter failed within 6 months, and was successfully replaced with a Panametrics Aquatrans AT600.
-
Optimizing Brine Flow In A Geothermal Power Plant
1/27/2022
Different flow meter technologies were used in this geothermal power plant to monitor and measure brine. However, these traditional technologies failed. That’s where Panametrics PT900 Portable Ultrasonic Flowmeter was able to help.
-
Reduced Bore Electromagnetic Flowmeter
10/29/2021
Being able to accurately measure both the quantity and rate of water passing through a water distribution system is crucial to gain an informed understanding of overall efficiency. As such, achieving a measurement that is exact as possible can have a significant impact on key areas. This includes supply planning, maintenance, resource deployment, leakage detection and the overall environment.