Drinking Water Flow Control and Measurement Whitepapers and Case Studies
-
AFC Semper RPM'S “Lift And Shift” Ability Shines In Forsyth County, Georgia
10/7/2021
Since the Forsyth County, Georgia, Department of Water and Sewer deployed the AMERICAN Flow Control SEMPER Remote Pressure Monitor (RPM) more than a year ago, it has seen numerous advantages. But the AFC SEMPER’s ability to move from one system asset to another, “Lift and Shift,” is among the greatest.
-
AFC SEMPER RPM Used To Study New Fairfield, California Transmission Line
9/9/2021
In March 2021, the city of Fairfield, California’s Water Division was tasked with commissioning a new 36-inch Cross Town Transmission Line (CTTL). The CTTL will enhance the already robust distribution system and better serve the water needs of the Water Division’s 33,000 customers. This new CTTL, however, will change the dynamics of the city’s current distribution system. To better understand how the new CTTL would affect operations, the AMERICAN Flow Control SEMPER Remote Pressure Monitor (RPM) was deployed to strategic points throughout the system.
-
ABB Flowmeters Help Keep Macallan Whisky At Its Peak
8/4/2021
Accurate measurement delivered by a range of ABB flowmeters is helping the company behind the world-renowned Macallan whisky brand to maintain its high product quality standards following its move to its new 187.2M USD distillery.
-
ABB Flowmeters Help Cut Water Loss In Bangkok
8/4/2021
ABB’s AquaMaster flowmeters have been integral to the overall water management solution. Over 400 AquaMaster flowmeters actively serve the Bangkok Metropolitan area helping optimize the management of the water distribution network.
-
Math Solutions Explained: Pipe Volume Gallons
8/3/2021
Water Online’s “Math Solutions Explained” series, presented by wastewater consultant and trainer Dan Theobald (“Wastewater Dan”), educates operators by explaining pipe volume gallons calculations.
-
Unlocking The Power Of Water Data
5/5/2021
More frequent capture of water supply and distribution data is becoming a must-have for utilities as they strive to build network resilience, improve customer experience, and meet regulatory expectations. Ovarro’s associate product line manager for RTUs & loggers, Adam Wright, shares insights into the latest developments.
-
AMERICAN Flow Control's Semper™ RPM With “Lift And Shift” Capability Helps Lowcountry Regional Water Resolve System Pressure Issues
5/5/2021
In the summer of 2020, the Lowcountry Regional Water System in Hampton, South Carolina, had a customer located in an industrial park report a low water pressure issue. The company was a commercial laundry that served the hospitality industry and provided linens to hotels around the Hilton Head area. The low water pressure issue was causing the company’s heat recovery system to work improperly shortly before the July 4 holiday. In its first use of the AMERICAN Flow Control SEMPER™ Remote Pressure Monitor (RPM), Lowcountry Regional Water System deployed two units to resolve the issue. One device was located on the water system’s side of the meter and the other device was placed inside the company’s building, where water enters the facility at the backflow preventer.
-
Durham, NC Improves Water Quality With Remote Pressure Monitoring, Sampling, And Flushing Stations
1/15/2021
The City of Durham is committed to providing safe drinking water to a service population of more than 289,000. The City’s Department of Water Management (DWM) ensures the delivery of water to approximately 99,000 service connections through 1,400 miles of watermains. Lake Michie and Little River Reservoir are the two sources that deliver raw water to the City’s two treatment plants, using a combination of gravity flow and electric and hydro-powered pumping systems. Together, these plants have the combined treatment capacity of 64 million gallons per day (MGD) with an average demand is 28 MGD.
-
Gwinnett County, GA, Improves Meter Program Through Science And Strategy
12/16/2020
Gwinnett County is located 30 miles northeast of Atlanta. The County is investigating methods to improve its strategic program for water meters. These improvements include updated testing equipment, a wider selection of approved metering technologies, and increased employee training. The goal is to install the most appropriate meter for each specific use, and to enhance the county’s excellent customer service.
-
Keeping Track Of Your Control Valve Information
11/19/2020
Water production and distribution in the City of Redlands, California, is managed by the Municipal Utilities & Engineering Department and is supplied from two water supplies, Mill Creek and the Santa Anna River. Treatment is provided at two conventional water treatment plants, Tate WTP and Hinckley WTP, each capable of producing approximately 14 MGD. Water is then fed into 7 different pressure zones due to elevation changes through a series of pump stations.