Drinking Water Filtration Case Studies and White Papers

  1. High Recovery Reverse Osmosis Water Treatment For Industrial, Agricultural, And Municipal Applications
    8/13/2014

    Industry accounts for nearly 60 percent of fresh water withdrawals in the developed world and agriculture consumes 70 percent of fresh water supplies globally, according to UNESCO.

  2. Pulp And Paper Manufacturer Significantly Increases Production While Complying With Discharge Limitations
    8/5/2014

    A U.S.-based pulp and paper manufacturer required high purity process and boiler feed water. It was using water from a local well and treating it with a 150 gpm conventional RO system operating at 75% recovery, but this was creating 50 gpm of wastewater – over 26 million gallons per year.

  3. Closed Circuit Desalination Technology Provides Steel Manufacturer ROI In Less Than 60 Days
    8/5/2014

    This leading rod and wire mill requires water for cooling steel and tools in its manufacturing process. Water used for cooling becomes contaminated with metals and lubricants and was therefore being disposed of as waste.

  4. Eliminate CIP And Cut Wastewater Disposal In Half With CCD
    7/31/2014

    A high water recovery rate is essential for this well-known soy protein manufacturer.

  5. Reliable Production Of High Quality Permeate For Irrigation
    7/26/2014

    Following one of the driest periods on record in California, farmers in the San Joaquin Valley faced restricted water allocations.

  6. CCD Technology Succeeds With Well Water Purification
    7/15/2014

    The Kittansett Golf Club in Marion, Massachusetts is rated one of America’s 100 Greatest Golf Courses by Golf Digest Magazine.

  7. Produce Potable And Pharmaceutical Grade Water From Problematic Brackish Water
    7/15/2014

    A pharmaceutical manufacturing plant located in Sedom, Israel faced challenging environmental conditions including low humidity, temperatures exceeding 105 degrees Fahrenheit and limited water supplies.

  8. Reducing Effluent Waste While Using Less Energy With CCD
    7/15/2014

    A pesticide manufacturing plant in Gujarat, India produces up to 6,000 metric tons per year of various pesticides for agricultural use.

  9. Hydrogen Sulfide Removal From Water Using AquaSorb® CX-MCA
    2/19/2014

    The “rotten egg” odor in some water supplies is caused by sulfide in water. Sulfide can be treated using oxidation techniques, the goal being to convert the sulfide to high oxidation state species such as sulfate to eliminate the taste and odor concerns. Traditional oxidation techniques such as ozone and chlorine can be used, but can be expensive due to the equipment required to add and monitor the oxidant, and can lead to by-products such as trihalomethanes (THMs), which are regulated in drinking water supplies.

  10. Using Membrane Contactor Technology To Extend Resin Bed Life
    2/13/2014

    In today’s economic environment when profits are reduced due to rising costs, it is necessary to find ways to save time and money.