Wastewater Analysis Solutions

  1. Dissolved Oxygen Measurement In Wastewater Treatment 11/11/2013

    A wastewater treatment plant separates solids from the liquid, and consists of two basic stages: primary treatment and secondary treatment.

  2. Dissolved Oxygen Measurement 11/11/2013

    One of the most important measurements in the determination of the health of a body of water is its dissolved oxygen content. The quantity of dissolved oxygen in water is normally expressed in parts per million (ppm) by weight and is due to the solubility of oxygen from the atmosphere around us.

  3. Primary Wastewater Treatment: Influent Monitoring 11/10/2013

    The raw sewage entering a wastewater treatment plant comes from a variety of sources. In addition to effluent from domestic users, effluent from industrial users and storm water run off can be present.

  4. IQ SensorNet 182 Models 3/22/2013

    With an easily scalable solution the 182, 182 XT, and 182 XT-4 allow for the connection of 1-4 sensors depending on which terminal you choose. Add sensors at any time and at any location or change them out with ease.

  5. Bringing Efficiency And New Confidence To BODâ‚… Analysis 2/4/2013

    Biochemical Oxygen Demand (BOD) analysis is the test everyone loves to hate—and for compelling reasons.

  6. ULTRAPEN™ PT3 ORP/REDOX & Temperature Pen 12/4/2012

    This instrument is designed to be extremely accurate, fast, and simple to use in diverse water quality applications.

  7. Aqua TROLL 400 Multiparameter Instrument 4/17/2012

    The Aqua TROLL 400 Multiparameter Instrument is ideal for long-term groundwater and surface-water applications. The instrument leverages our patented, EPA-approved RDO® Technology. The compact instrument houses six water quality sensors and measures 12 parameters.

  8. YSI IQ SensorNet 2020 XT 1/24/2012

    The YSI IQ SensorNet 2020 XT is a modular water quality system for complete process control designed for wastewater. The 2020 XT network can accept additional sensors easily at any time and grow as your facility grows. 

  9. Monitor AMI pH-Redox 12/20/2011

    Monitor for continuous measurement of pH or redox (ORP) in potable water and effluents with combined or separated sensors with reference electrodes for various sampling conditions. 

  10. Application Note: Dairy Farms Use YSI Instruments To Map Volume Of Wastewater Lagoons 8/4/2011
    On July 1, 2010, dairy farm waste management plans are due to the California Regional Water Quality Control Board. By YSI