UV Pure Accessories

UV Pure offers a variety of standard and optional accessories for both the Hallett and Upstream systems.

Wireless Remote Monitor

The Remote Monitor is a wireless alarm that can be positioned up to 164 feet (50m) from a UV Pure Upstream or Hallett unit. The handheld device has an LCD display to provide status messages and an audible alarm which sounds in the event of a system fault these messages are similar to the ones on the main unit.

Automatic shut-off solenoid valve

UV Pure^®’s solenoid shut off valves allow a water supply to be turned on energizing the coil of the valve with 240v AC (SVM range). When de-energized the valve will close - shutting off the water supply.

Flexible stainless steel hook-up hoses

Easy to attach stainless steel hook-up hoses with are standard equipment with every UV Pure^® Hallette^® and Upstreame^® system.

Hallett Diagnostic Tool

The Hallett Diagnostic Tool (HDT) is primarily used to display sensor outputs for NSF/ANSI 55 Class A certified Hallett systems and Non-Certified Hallett systems. It allows the operator to record values and establish trends. The HDT is also indispensable for troubleshooting on site. It works for both Hallett 13 and Hallett 30 systems.

Purge Valve

Sites that contain high iron and/or other minerals may precipitate out of solution as a result of a gradual rise in water temperature due to low or no flow. While this happens rarely, if it does, the Hallett Purge Valve is recommended.

Power Conditioner

UV Pure provides a Power Conditioner as standard equipment for all Hallett and Upstream systems to provide noise filtration and surge protection.

4-20mA Unit

The 4-20mA Unit allows for remote monitoring of your Hallett system. It provides an analog output of UV Intensity and Net UV Transmittance (UVT) from a Hallett system. The loop-powered transmitter can be used with any device that requires a 4-20mA signal for logging purposes or for process control.