Product/Service

Positive Displaccement Pump F55GS

This is a vertical or horizontal positive displacement pump
  • Output to 7 GPM
  • Head to 275 feet
  • Max: Viscosity 50,000 cP
  • Choice of 5 Stator Materials
  • Teflon Stator Std.
  • Choice of Pump Length
  • Easy Cleaning
  • Easy to Dismantle
  • Tools Not Required

This is a vertical or horizontal positive displacement pump, which can be used with the following Flux motors:
F450 EX, F448 TEFC, F410 EX UL, F408 TEFC Electric Motors or F416 or F416-1 Air Motors.
Maximum Viscosity Material for this pump is 50,000 cP.

The stator is an easily exchangeable push-in stator, which can be either of solid material or a steel shell, vulcanized with an elastomer specific for the application. On the inside of the stator rotates the eccentric rotor which is driven by a stainless steel shaft from the planetary gear unit below the motor. (max RPM 900)

This pump is very easy to dismantle for cleaning. By releasing the top union nut, the motor can be removed. When the lower union nut is released, the gear reducer, drive shaft and rotor can be withdrawn from the stator and outer tube. Stator can be removed by unscrewing (reverse thread) stator houing at bottom of tube. Tools are not required for this operation.

Flux Pumps Corporation, 4330 Commerce Circle, Atlanta, GA 30336. Tel: 404-691-6010; Fax: 404-691-6314.