Madewell Tank Linings and Immersion Service Coatings

Madewell 1103

• 100% solids epoxy coal tar (15-30 mils per coat)
  
• Multi-purpose corrosion barrier for protection of steel and concrete exposed to water, salts, and many chemicals. Relatively easy to handle and apply. Relatively long recoat window. Very low permeability.

Madewell 1010

• 100% solids novolac epoxy for application by plural component spray equipment (60+ mils per coat)
  
• Specialty corrosion barrier for protection of steel and concrete exposed to aggressive solvents. Withstands constant immersion in toluene, MBTE, TAME, ethanol, trichlorethylene, ethyl acetate and ethylene dichloride.

Madewell 1312S

• 100% solids epoxy (12-15 mils per coat)
  
• General-purpose corrosion barrier for protection of steel and concrete exposed to water, salts, and most chemicals. Easy to handle and apply by spray, roller or brush. Good color stability. Sanitary, easy to clean surface.

Madewell 1312E

• 100% solids epoxy laminate system (45-60 mils per layer)
  
• General-purpose corrosion barrier for protection of steel and concrete exposed to water, salts, and most chemicals. Provides structural film integrity when required. Typically topcoated with l312S, 1103, 1010 or Mainstay DS-6.

Madewell 213

• 100% solids furan corrosion barrier (45-60 mils per coat)
  
• Patented heavy duty furan based corrosion barrier withstands a variety of environments including strong acids, bases, oils and most solvents and some oxidizing agents. Available in black.

Madewell Products Corporation, 7561 Industrial Court, P.O. Box 902, Roswell, GA 30077. Tel: 770-475-8199; Fax: 770-475-8167.