ISEmax CAS40D
ISEmax CAS40D is an ion-selective electrode system for the continuous measurement of ammonium, nitrate, potassium and chloride. The system consists of a sensor based on the Memosens protocol, electrodes and the Liquiline CM442 transmitter.
Click Here To Download:
•ISEmax CAS40D Datasheet
ISEmax CAS40D is an ion-selective electrode system for the continuous measurement of ammonium, nitrate, potassium and chloride. The system consists of a sensor based on the Memosens protocol, electrodes and the Liquiline CM442 transmitter. It is mounted on the basin rim. Up to three ion-selective sensors simultaneously measure nitrate, ammonium and, where applicable, other variables in the aeration basin.
Your benefits
- Reliable, cost-saving unit:
- Nitrate and ammonium measured directly without the need for expensive sample conditioning
- Ion-selectivity prevents interference from nitrite
- Optional potassium and/or chloride measurement, also to compensate high concentrations of interference ions
- Low operating costs since no reagent used
- Versatile and flexible:
- Large measuring range 0.1-1000 mg/l NH4-N and 0.1-1000 mg/l NO3-N
- Easy-to-use and safe:
- Installed directly on the basin rim, no measuring container or sample-conveying pump required
- Low maintenance thanks to automatic flushing unit
- Membrane cap replacement every 6 months prolongs electrode service life
- Standardized communication via the Memosens protocol enables plug&play
Click Here To Download:
•ISEmax CAS40D Datasheet