Capacitance

BinMaster, Division of Garner Industries "true" capacitance probes that are calibration stable in temperature varying applications and completely immune from problems created by electrical static and radio frequencies. Probes sense the presence or abscence of material in contact with the probe surface by sensing a capacitance change as small as 1 picofarad at the level the control is placed. Ideal for dry solid, slurries or liquid applications. Probes mount easily to the top, sides or bottom of tank. Many probe options are available to fit your application.

Pro X & Pro IIX
The Pro X capacitance sensor is specially designed for applications in hazardous locations. It's Pro Shield technology ignores material buildup, guarding against false indications. The sensor housing is explosion proof - for Class II approval applications, select the Pro IIX model.

Pro Flushmount
The Pro I-FL Flushmount capacitance probe features a noninvasive design that mounts on the exterior of the vessel. Applicable for a wide range of solid, liquid, and slurry materials where intrusiveness is a concern.

Pro IIIX
The Pro IIIX capacitance sensor offers reliability and affordability. Its probe assembly is constructed of 5/8" stainless steel covered with a Delrin sleeve, offering increased durability for use in abrasive environments. This non-shielded probe is ideal for use in both liquid and solid applications.

Pro Remote
The Pro Remote capacitance sensor is specially designed for high temperature, vibration, or hazardous applications. This model features remote electronics located in a separate housing. Depending upon necessary sensitivity, this allows the sensor's electronics to be safely mounted up to 75' from the sensing probe and hostile environment.

Pro DC
The Pro DC capacitance sensor offers reliable point level detection in a low voltage application. Its Pro Shield technology guards against false readings from material buildup. This allows the sensor to be used in vessels storing a wide variety of dusty, sticky, or clinging materials.

Pro Point
The Pro Point is a compact capacitance probe for reliable level measurement and plugged chute detection in liquid, powder, granular, and pelletized materials. This probe is designed for tight quarters where proximity switches don't work. In addition, its special Pro Shield technology ignores the material buildup that causes proximity switches to fail.

<%=company%>, 4200 N 48th Street, Lincoln, NE 68504; Tel: 402-434-9102. Fax: 402-434-9133.