ABS Submersible Sewage Pump XFP 80C-201G - 60Hz US Datasheet

Robust, reliable, submersible pumps, with Premium Efficiency motors from 2.4 to 40.2 hp. For the pumping of wastewater and sewage from buildings and sites in private, commercial, industrial and municipal areas.

Features

• The water-pressure-tight, encapsulated, flood-proof motor and the pump section form a compact, robust, modular construction.
• NEMA Class A temperature rise.
• Premium Efficiency motors in accordance with IEC 60034-30 level IE3* with testing in accordance with IEC60034-2-1.
• Continuously rated motor in submerged and non-submerged applications.
• Double mechanical seals. SiC-SiC at the medium side; SiC-C (80C - 150E) and SiC-SiC (100G - 201G) at the motor. XFP 100G - 201G has an additional inner lipseal at the motor side. All seals are independent of rotation direction and resistant to temperature shock..
• Anti-wicking cable plug solution (80C - 150E), or water-pressure-sealed connection chamber (100G - 201G).
• Hydraulic options of Contrablock and Contrablock Plus impellers for high efficiency, or vortex impellers for maximum solids handling.
• Lubricated-for-life bearings with a calculated lifetime of minimum 50,000 hrs. (80C - 150E), and 100,000 hrs. (100G - 201G).
• Stainless steel shaft. Designed with high safety factor to prevent fatigue fracture.
• Temperature monitoring using bi-metallic thermal sensors in the stator windings that open at 140 ºC (284 ºF).
• Seal monitoring by a moisture probe (DI) in the motor and seal chambers (80C - 150E), or motor and oil chambers (100G - 201G), which signals an inspection alert if there is leakage at the shaft seals.
• Smooth outer design to reduce rag build-up.
• Stainless steel lifting hoop.
• 3”, 4”, 6” and 8” radial slot ANSI flange discharge.
• Maximum allowable temperature of the medium for continuous operation is 104 °F.
• Maximum submergence depth of 65 ft.
• Available in explosion-proof version in accordance with international standards FM / CSA.