08.08.25 -- 5 Advances To Protect Water Sources, Availability

Many factors go into picking the right PFAS treatment solution and there is no silver bullet, no “black box”.  And knowing what questions to ask for any particular system can vary state to state, depending on the influent water. 

The existing water treatment at the Toquepala Mine in Peru included only chemical disinfection to provide the local population with water only for non-potable purposes. An alternative solution was essential. 

Using ozone and UV advanced oxidation processes (AOPs) can help industrial facilities achieve compliance, but what's the right process for your application?

How does a contractor navigate the installation of new water and sewer mains in a neighborhood with heavy traffic, narrow roadways and extensive existing underground infrastructure? The answer is the ALPHA™ restrained joint by AMERICAN Flow Control.

When the Park Avenue East Lift Station in Mansfield, Ohio, suffered recurring flooding due to failing valves, a bigger picture goal came into view: Build a new lift station.

When Kent County Water Authority faced the urgent replacement of a 94-year-old hydrant tied to a 1931 cast iron main, they were determined to maintain fire protection and avoid customer disruption.

This article will explain why pre-treatment is so important to direct potable reuse and the most important aspects of pre-treatment design.

Ozonation and biologically active filtration (O3-BAF) is being increasingly used to address the issue of organic micropollutants (OMPs) in wastewater treatment and potable reuse.

In this white paper, we will drill down into which technology has particularly proven itself in terms of energy efficiency in the water industry.

Discover how Nutter Fort, WV, modernized its water infrastructure with smart metering technology, reducing water loss, cutting costs, and fostering sustainability in a close-knit community.

The City of Grand Rapids, MI sought out a partner to take responsibility for the operation and maintenance of the monitoring network including hardware, software, and data preparation.

Endress+Hauser’s iTHERM SurfaceLine TM611 non-invasive temperature measurement performs comparably to traditional industrial thermometers with an elegant mechanical innovation.