|Flygt, a brand of Xylem, is synonymous with engineering excellence, reliability and closeness to customers.|
Flygt is a world-leader in the design and manufacture of dry and submersible pumps, mixers and related intelligent controls systems. Under the Flygt banner, customers have access to a complete range of products and solutions for moving water, wastewater, and advanced monitoring and control equipment to optimize their use. Product development and manufacturing of Flygt products is based in Sweden.
|Flygt Experior™ Brochure||With Slimline Pumps, Flygt Increases Efficiency By Decreasing Size||Flygt Mixing Video|
ARTICLES, CASE STUDIES, PRODUCT AND PRESS RELEASES
Significant Upgrades Enable City Of Atherton To Meet State’s DNR Discharge Requirements
Built in the 1980s, Little Blue Valley Sewer District operates Atherton, which was designed to reduce the primary process chain to preliminary bar screening and aerated grit removal, while relying solely on secondary treatment performed in four, standalone 42-ft by 400-ft aeration/clarification basins.
Advanced Technologies Stop Plant Bypasses
The collection system in Thief River Falls, Minnesota serves 8,500 residents.
New Generation Pump Clears Clogs At City’s Lift Station
The scenic community of Waupaca, Wisconsin derived its name from the translation of a Native American term meaning “clear water”.
A Final Solution For Homeowners’ Pump Failures
Robert Dohm knows a lot about fluid-handling pumps.
Successful Retrofit ‘By The Numbers’
JEA, formerly Jacksonsonville Electric Authority, ranks among the nation’s largest and most efficient community-owned electric, water and sewer utilities.
Wastewater Utility Gains Clog-Resistant Lift Stations With Prefabricated Fiberglass Units
The city of Haverhill, MA, a community of 68,000, shares much in common with the sewage infrastructure of other long-established New England municipalities.
Life Cycle Costs (LCC) For Wastewater Pumping Systems
The purpose of this white paper is to contribute to a better understanding of how Life Cycle Cost calculations can support the design and selection of more cost-effective wastewater pumping systems.
Submersible Mixer With Variable Thrust Reduces Energy Costs By As Much As 50% Or More
Mixing is performed in many stages of wastewater treatment to generate a hydrodynamic state that secures blending, solids suspension, or distribution. Conventional single-speed submersible mixers have traditionally been used for these applications, including activated sludge treatment, sludge holding and digestion. Mixer selection is typically based on accommodating a plant’s peak design load.
Integrated Intelligence: A Breakthrough In Wastewater Pumping
Today’s customers can have higher pump system reliability, more and smarter functions, lower operating costs and data connectivity when pumping wastewater using an intelligent pumping system.
Adaptive N-Impeller Solves Clogging Issues For Small-Range Wastewater Pumps
Clogging is the most common problem in wastewater pumping and a particular issue for small pumps due to their limited hydraulic space. The consequences include increased energy consumption, additional maintenance and emergency call-outs, all of which result in higher operating costs. Wastewater pump manufacturers are continually striving to develop improved hydraulics that reduce clogging while maintaining high performance.
Sludge Handling In The Sooner State
Smaller Oklahoma city upgrades their wastewater treatment plant’s sludge handling system using the latest intelligent equipment. The new pumps went into service in April and May 2017 and the staff is thrilled that they have experienced no clogging.
New Jersey Town Sticks With A Winner
A northern New Jersey town decided to upgrade their main station utilizing the same equipment that has provided them with decades of reliable and trouble free service. When replacement options arose, the city immediately elected to stay with Flygt due to their positive experience with the quality and reliability of the equipment, combined with the availability of local service. Read the full case study to learn more.
Vertical Pump Portfolio Expands Range With Turbines Greater Than 30”
Xylem’s vertical turbine portfolio has served the market with a wide range of hydraulic conditions to meet many pumping needs with optimum efficiency using state-of-the-art techniques in turbine pump design.
Successful Trials With Flygt Adaptive Mixing Technology
Albion, MI, completed the update of several components of its four-MGD plant in the fall 2017. Afterwards, the plant superintendent became interested in testing the impact that optimizing his mixing might have on other aspects of his conventional activated sludge process with enhanced biological phosphorus removal. Read the full case study to learn how the test showed that there can be dramatic opportunities for right sizing mixer thrust, when the equipment is available to take advantage of it.
ABOUT FLYGT -- A XYLEM BRAND
Flygt - A Xylem Brand is the originator of the heavy duty electrical submersible pump. We have been manufacturing high quality heavy duty equipment since 1901, and continue to provide support, expertise and the highest quality products available for pumping and mixing contaminated and abrasive liquids.
At Flygt we understand that the total Life Cycle Cost of ownership means more than merely having an efficient motor. Providing products that unequivocally possess the highest sustained energy and hydraulic efficiencies within the wastewater marketplace is what makes lifelong customers.
The new and innovative solids handling Flygt N Pump technology sets the standard for clog free operation while delivering sustained high efficiencies -- even in the toughest wastewater and sludge applications. Key to the N-Pump's design is the dynamic interaction of the extreme back-swept impeller vanes, and the stationary relief groove in the volute suction where the leading edge of each impeller vane is cleaned during pump rotation. Our N-Technology delivers trouble-free pump operation and is available in Flygt submersible pumps ranging in size from 3 to 500 horsepower. Please note that many older existing Flygt pumps can be upgraded with today's innovative N-Technology.
The Flygt N Pump’s revolutionary, patented self-cleaning impeller design provides a flow path through the pump, greatly reducing the risk of clogging, and makes the N-Pump series an ideal solution for high-efficiency pumping over long duty periods. That means lower overall energy consumption: a significant factor in reducing the whole life cost of your pumping operation. Contact your local Flygt Product office or representative for more information, and be sure to ask about our Energy Savings Guarantee.
Our Flygt Submersible Propeller Pumps move large volumes of water within low to medium head applications. They are smaller than non-submersible offerings as the motor and hydraulics are integrated into one compact unit, resulting in smaller pumping stations that are less complex and thus more cost effective to build. Operating submerged they take up less space while noise and motor cooling problems are eliminated. With individual pump capacities from 4,000 to 120,000 GPM, Flygt brand Propeller Pumps have been used in a variety of applications such as: storm water, raw water, WWTP effluent, amusement park attractions, surf riders and flood control.
Flygt Pressure Sewer Systems (PSS) provide an efficient, cost effective method to sewer your residential land development projects. Flygt low pressure systems give contractors an all-in-one packaged approach to pressurized sewage system applications. The ensemble combines all the major benefits of Flygt Progressive Cavity Grinder pumps teamed with a heavy-duty fiberglass basin. The result is extraordinarily reliable pumping of residential wastewater in an energy efficient, cost effective manner.
The first Flygt Submersible Mixers were introduced in 1977. They have proven themselves in a multitude of varied applications over and over again. Flygt Submersible Mixers are an excellent choice for use in a variety of municipal or industrial applications.
Flygt Top-Entry Agitators are now available in a multitude of combinations for adapting to a wide range of application scenarios. Using a standardized range of components and materials, the modular design includes a series of impeller diameters, shaft lengths and rotational speeds, translating to a vast array of agitator performance characteristics.
Flygt Monitoring and Controls Systems combines the user friendly APP family of controllers with fully engineered electrical control panels that can integrate into your existing telemetry network or with the our AquaView SCADA System. The result is hands off state of the art liquid handling. Couple our AquaView with a dependable Flygt submersible pump and let us Monitor and Service your system for you!! Flygt pumps are available from ½ to 1000 Horsepower and with flow rates of up to 90,000 GPM.
Flygt Station Control Panels “SCP” delivers the reliability you’ve come to expect coupled with unique control flexibility that allows for dramatic operational change without rewiring. At the heart of the Flygt SCP is the Flygt APP 721 advanced all-in-one station controller. Its pre-configured wastewater transport control algorithms allow collection system optimization just a few clicks away. By linking Flygt’s wastewater pumping, you can achieve a fully integrated approach to wastewater transport, precisely controlling how it’s delivered to your plant. In short, it will change the way you look at your wastewater plant - Literally.
<Flygt has over 100 factory authorized service and repair centers nationwide. Each stocked with genuine Flygt spare parts. In addition, we have more than 20 fully staffed Flygt facilities ready to serve you now. They're conveniently located across the country, and all are connected with our computerized inventory system to get the parts you need quickly and efficiently.
We are proud of our first fifty years in the US…But wait ‘til you see what's next!
Globally, Xylem is the premier fluids handling solutions provider with over 4,500 employees, representation in over 130 countries, with an installed base of more than 3,000,000 units. 2009 turnover was $1.6B USD.
To find Flygt Products near you visit the Flygt Sales Office Locator.
Flat topography, low elevation, and high rainfall conspire to make collection and treatment a hassle in Jefferson Parish, LA, requiring more than 500 lift stations to get the job done. Learn how a new wastewater pumping system virtually eliminated maintenance and reduced energy consumption by as much as 75%.
With lift stations set among households and a pristine lake, failure is not an option for the Valley Rural Utility Company in Lawrenceburg, IN. The old lift stations were costing up to $30,000/year to maintain, due to poor design and persistent clogging. A new Flygt N-Pump has changed the utility’s course, however, proving with one (easy) installation the cost savings that can be gained through advanced impeller technology and remote SCADA operability.
More than two years ago, Jefferson Parish, LA, installed Flygt Experior pumps at their worst-performing lift stations — sites that were plagued by clogging, overflows, and daily maintenance requirements. One of the main culprits was nonwoven fabrics, aka "flushable" wipes, which have become a nationwide nuisance for wastewater utilities.