Product/Service

WaterWorks™ Total Iron Visual Test

The WaterWorks Total Iron Visual Test for water quality testing detects ferric (Fe+3) as well as ferrous (Fe+2) forms of iron. This test makes accurate total iron testing easier and does not require a meter. Test results are quickly available three minutes after following a simple test procedure.

The WaterWorks™ Total Iron visual test for water quality testing detects ferric (Fe+3) as well as ferrous (Fe+2) forms of iron. This test makes accurate total iron testing easier and does not require a meter. Test results are quickly available three minutes after following a simple test procedure.

WaterWorks™ Total Iron visual test offers an ideal testing method for ensuring drinking water has iron levels below the UDEPA recommended maximum contaminate level of 0.3 ppm. Detection levels for this visual test are 0, 0.3, 0.5, 1, 3, 5 mg/L (ppm). The test kit contains 50 individually wrapped foil powder pillows with a color chart card for $25.99 each. WaterWorks™ Total Iron (Fe+2 / Fe+3) is the quick solution for testing total iron concentrations in drinking water.