06.17.26 -- Wastewater Product Showcase

Orenco’s AdvanTex AX-Max™ Treatment Systems are a dependable, proven technology for treating domestic-strength, primary-treated effluent to better-than-secondary standards, including nitrogen-reduction. They consist of sturdy, watertight fiberglass tanks that incorporate recirculation-blend and discharge tankage in a single module.

U.S. Pipe’s HP LOK Restrained Joint Pipe and Fittings offer flexible push-on joints for 42"–64" ductile iron pipe, providing a working pressure equivalent to the parent pipe, with a maximum rating of 350 psi.

Huber Technology, through its subsidiary Huber-Hydropress, is the inventor of the STEPSCREEN concept. This design was unveiled in the early 1980’s to much acclaim and was readily adopted into the designs of well over 3,000 facilities worldwide since the STEPSCREEN introduction.

In today's modern wastewater treatment plants, meeting high standards in effluent quality, cost efficiency and odor control is a must. To meet these higher standards, JWC introduces the Bandscreen Monster, a member of the Monster Separation System line of high performance screens.

Smith & Loveless combines the proven field-erected OXIGEST treatment system with integral TITAN MBR Membranes for large-flow and/or high BOD applications with stringent effluent requirements. 

The EZ Valve is an inline insertion valve that can be installed on water lines and depending on the pipe material, installation takes anywhere from 45 minutes for our smaller valves to 3 hours for our larger range.