Vertical Pumps
Dependable, powerful, versatile, Crisafulli Vertical Pumps are especially designed for stationary applications, such as sewage digesters and lift stations, manure tanks, chemical sumps, and dry docks
Dependable, powerful, versatile, Crisafulli Vertical Pumps are especially designed for stationary applications, such as sewage digesters and lift stations, manure tanks, chemical sumps, and dry docks. Each Crisafulli Vertical Pump has a Crisafulli Impeller Inside. Flow rates up to 18,000 gallons per minute (GPM) and Total Dynamic Heads up to 240 feet are offered. Standard Duty Crisafulli vertical pumps are reliable, proven performers - they are equipped with grease lubricated, sealed bearings and are the ideal choice for moving relatively clean water. For sand, silt, mud, sludge or abrasives, choose the more rugged Severe Duty version - as well as being constructed of abrasion-resistant heat treated steel (450 Brinell hardness) the Severe Duty version, with its dual mechanical shaft seals (to prevent contamination) and a totally enclosed oil filled bearing frame, is virtually unaffected by the most demanding environments. All Crisafulli Vertical Pumps are submersible, centrifugal pumps. Ranging in size from 2 inches to 24 inches, these pumps require no priming, check valves, suction pipes, or screens, and are self drained. All steel construction assures long life and trouble free operation. The pumps pass remarkably large solids and pump high-weight/high viscosity fluids with ease.
Discharge sizes from 2 inch to 24 inch
Horsepower from 1 to 225
Single or twin intake ports
Standard lengths to 20 feet
Custom lengths to 60 feet
Power sources include direct-drive electric, belt and sheave drive (electric), or gear box driven with gas, diesel or electric motors.
Optional open impeller is recommended for manure and sewage uses.
Stainless steel or special epoxy-coated versions are available for high-acid applications.
Single or double suction.
Dual drive options (PTO/electric) ensure pumping capability during power outages.
Custom design for your particular lengths, angles of discharge and high-viscosity wastes
Flow rates from 32 GPM to 18,000 GPM
Long useful life
Low maintenance
No priming required
Proven reliability
Simple to use
Total Dynamic Heads from 5 feet to 240 feet
Features
Benefits
SRS Crisafulli, Inc., 1610 Crisafulli Drive, PO Box 1051, Glendive, MT 59330-1051. Tel: 406-365-3393; Fax: 406-365-8088.
This website uses cookies to ensure you get the best experience on our website. Learn more