Product/Service

TurboDrum IN™ Inclined In-Channel Drum Screen

Source: Headworks International Inc.

TurboDrumIN

The TurboDrum IN is installed in a channel at a 35 degree angle. For pressure feed applications, the same unit can also be installed as a self-contained TurboTank™ system. 

Request Information

The TurboDrum IN is installed in a channel at a 35 degree angle. For pressure feed applications, the same unit can also be installed as a self-contained TurboTank™ system. The operation cycle controlled by monitoring differential head loss across the screen is performed by rotating the basket with the process flow entering the internal diameter of the screen and exiting through the screen elements to the outside. The screenings are retained on the internal surface of the screen by paddles fixed longitudinally to the inner screen surface which carries the material to the top where it is sprayed and falls into the receiving hopper. The receiving hopper spiral conveys the screenings material through the optional washing and compaction zone and discharge outlet.

Product Highlights

  • No bypassing as the flow enters inside the drum and exits to the outside
  • 0.25mm - 6mm wedge wire, or 2 - 6mm perforated plate
  • Screenings, conveying, compaction, washing, and bagging is handled in one unit with one motor.
  • Screen sizes are available for flows for up to 4600m3/h (29mgd)
  • All in one system allows for a very low maintenance requirement
  • Optional TurboWash™ for superior screenings washing

Need More Information? Just Ask.

Click the button below to directly contact the supplier. Use it to:

  • Ask a question.
  • Request more detailed information or literature.
  • Discuss your current project/application.
  • Request a quote.
  • Locate a distributor in your area.
  • Schedule a demo.
Request Information