Submersible Sewage Pump Type ABS XFP 100J - 600X 60Hz Datasheet

Submersible sewage pump type ABS XFP is designed for municipal and industrial wastewater equipped with Premium Efficiency IE3level motor. Suitable for clean water and wastewater, sewage with sludge and high rag content, solids and fibrous material.

Construction

• Premium Efficiency IE3 motors in accordance with NEMA and IEC 60034-30. Testing in accordance with IEC60034-2-1.
• The water-tight fully flood-proof motor and the pump section form a compact and robust unit, easy to clean and easy to service.
• Water pressure sealed connection chamber, with two stage cable entry, protected against excessive cable tension and bending.
• Bimetallic thermal sensors in the stator which open at 140 °C (284 °F).
• Rotor and shaft dynamically balanced, upper and lower bearings lubricated-for-life, maintenance-free.
• Insulated upper bearing for VFD operation standard for PE6 and optional for PE5.
• Triple shaft sealing.
• Upper and lower sealing by means of a silicon carbide/silicon carbide mechanical seal, independent of the direction of rotation.
• Inspection chamber with sensor for moisture protection to indicate water leakage through mechanical seal, also standard for Ex version according to FM and CSA approval.
• Option: Blockage- and maintenance-free internal closed looped cooling system. Cooling medium: Glycol - water mixture (standard for PE6 range).
• 2-or 3-channel Contrablock, 1-, 2- or 3-channel closed impeller or 3-channel skew design.
• These pumps are available as standard and explosion-proof construction in accordance with international standards such as 500 Class I, Division 1, Groups C and D hazardous (classifield) locations.