Submersible Sewage Pump Type ABS AFP M8-M9 60Hz Datasheet

Submersible sewage pump, type ABS AFP are suitable for clear and wastewater, for sewage with sludge containing solids and fibrous material.

Construction

• The water-tight fully flood-proof motor and the pump section form a compact and robust unit.
• Water pressure sealed connection chamber, with two stage cable entry, protected against excessive cable tension and bending.
• Water pressure sealed motor, insulation class H with bimetallic temperature monitors in the stator. • Rotor and rotor shaft dynamically balanced, upper and lower bearings lubricated-for-life, maintenance-free.
• Blockage-free cooling system. Cooled by the medium.
• Double shaft sealing.
• Lower sealing by means of a silicon carbide mechanical seal, independent of the direction of rotation.
• Upper mechanical seal carbon/chrome steel, independant of direction of rotation.
• Oil chamber with seal monitor sensor to indicate water leakage through mechanical seal.
• Hydraulic parts with open or closed 3-channel or 5-channel impeller.
• These pumps are available both in standard and explosionproof versions in accordance with international standards e.g. explosion- proof in accordance with NEC 500 for Class I, Division 1, Groups C and D in hazardous (classified) locations