PRV Controller

The Sentinel PRV Controller was designed as a tool to reduce unaccounted for water in a distribution system. By reducing the pressure in a distribution system, undetected leakage is reduced. The pressure reduction can be based on time or if the PRV is in line with a water meter, by specific flow rates.

In the event of a high demand on the water meter the unit will default to the high pressure. The controller switches between the initial pressure set by the PRV and a second reduced pressure determined by the operator.

In addition to the controller, the company offers the 2 Telemetry, dial out alarm PRV controllers, the Sentinel+, and the Pegasus, which will allow the operator to data log the pressures on either side of the PRV as well as flow and also adjust the pressure ranges remotely. The Pegasus will allow for infinite pressure ranges to be set as opposed to the two-step control of the Sentinel.

Features
•time and/or flow based two-point control
•built-in flow datalogger
•battery life greater than seven years
•small compact IP68 design
•failsafe operation
•telemetry option with alarm capability

RADCOM Technologies, Inc., 150-L New Boston St., Woburn, MA 01801. Tel: 781-938-6663; Fax: 781-938-5553.