Pipeline and Manhole Rehab Products

This single descriptive page compiles the company's line of products, which include For pipe repair:

Link-pipe - An internal no-dig stainless-steel grouting sleeve that seals leaks and makes structural repair. Sized from 6 to 30 in. in diameter and in 12-, 18-, 24- and 36-in. lengths. Sections are series installable to repair any required length. Flow stoppage is not required.

Reamer-cutter - A hydraulic cutter for trimming protruding house laterals prior to sliplining.

Grouting packers - Multi-grout low-void packers for all sizes of main from 6 to 120 in.

Lateral packers - For grouting 4-, 5-, or 6-in. service lines up to 20 feet from the main line. Sizes available for 8- to 24-in. mainline pipe. Also for sealing house connections after lining.

Push-type lateral packer - For sealing 4-, 5- or 6-in. laterals accessible from the cellar or a cleanout. For manhole rehabilitation:

Flow by-pass plugs - Several available types for by-passing flow while working in the manhole, eliminating by-pass pumping.

Reliner - Fiberglass invert sections in 8- and 12- full-depth flumes with pipe ends for 4- to 12-in., fit through a 24-in frame opening. Can be installed quickly avoiding by-pass pumping. No brickwork needed.

Drycon - Two coats of the cementitious coating allows old brick and block manholes to withstand 16 feet of water pressure; three coats up to 104 feet. Companion products are Octocrete, Octoplug, and the 15-sec-set plug, Ipanex-Rapid.

Drycon-SM - Special formulation for spraying allows a build-up of 1 in. or more for structural repair where needed. Waterproofs.

Ipagard - Specially formulated water-based, three-part, trowel-on epoxy for hydrogen sulfide resistance.

Inflow protectors - FRW Industries "dishes" sitting under the cover to prevent water and dirt from entering the system. Sizes up to 36 in.

Manhole vacuum tester - Approved by NASSCO for checking the tightness of rehabilitation work.

Pipe plugs - Multi-size, single size, high or low pressure for all needs.