Milroyal G Metering Pump
Economical and robust, the Milroyal G pumps dose all traditional liquids used in water treatment and industrial processes including: acids, bases, chlorinated products, coagulants, and other products. Designed for ease of maintenance and start-up, the Milroyal G features a robust HPD-style hydraulically actuated diaphragm liquid end coupled to a variable eccentric drive. The absence of contour plates in this liquid end results in "straight-thru" flow ideal for handling polymers and slurries. A unique integral 3-function valve allows for purging of any entrapped gases in the hydraulic oil without disturbing the relief valve setting. Also integral to the liquid end is a site glass for visual indication of a relief condition in the hydraulic system. The smooth sinusoidal flow produced by the variable eccentric drive minimizes flow pulsations and mechanical shock to system components.
Product Features
- HPD liquid end design eliminates contour plates.
- Double diaphragm w/leak detection available (10/98).
- Liquid End Materials: PVC, PVDF, 316SS.
- High viscosity and slurry liquid end options.
- 56C face and IEC motor options
- Integral 3-function valve in hydraulic oil system: automatic airbleed, safety/relief valve, purge button.
- Non-lost motion drive design minimizes flow pulsations and mechanical shock.
- AC & DC variable speed drives available for automatic control from a 4 - 20 ma signal.
- Electronic capacity control (stroke length control) from a 4 - 20 ma signal.
- Recommended Service Intervals: 8000 hours when operating at full rated pressure
Milton Roy Co., 201 Ivyland Road, Ivyland, PA 18974. Tel: 215-441-0800; Fax: 215-441-8620.