MicroTSCM Streaming Current Monitor

The MicroTSCM Streaming Current Monitor establishes a new level of control for plant operators that depend on Streaming Current to maintain water quality. Unlike other systems, the MicroTSCM can be calibrated to a known Ion Charge unit (ICu) value, using a cationic polymer solution. Once calibrated, the operator can use the MicroTSCM to determine the control set-point for the plant. This set-point is established through optimization and it reflects the actual ICu of the sample stream.

Establishing an actual ICu value for the control set-point ensures the operator can always return to the same conditions in the event of a plant upset, equipment failure, or shut down. Routine calibration ensures that the integrity of the output can be maintained by compensating for standard wear-and-tear on the probe and electronics.

The graphical display of the MicroTSCM monitor provides the operator a fast and easy way to keep up with what is going on inside the plant. Historical trending of readings over the previous 8 or 24-hour period is continuously displayed as a graph on the screen.

The sensor design incorporated into the MicroTSCM was developed to operate under the most turbid conditions. The HF MicroTSCM monitor, coupled with leading-edge sensor technology provides an easy-to-use tool for precise control over your chemical dosing system.

Features

• Graphical display
  • Quickly view historical trending of ICu readings over an 8 or 24 hour period
• Calibration to a known value
  • Maintains accuracy over the life of the probe
• Built in diagnostics
  • Full time diagnostic software automatically monitors and detects errors
• User programmable offset
  • Simplify human interface by setting the output to reflect zero when optimum dosing conditions are met
• On-screen instructions
  • Easy to use menus guide you through set-up and calibration procedures
• Three separate alarm contacts
  • System alarm and two user-programmable Hi/Lo ICu alarms provide continuous confidence in the measuring process
• High / Low gain switch

Optional features

• Flow Alarm
  • Automatically alerts operator if there is disruption in flow to the sensor
• Proportional integral controller
  • Automatically controls coagulant dosing
• Serial ports
  • The optional RS-232 or RS-485 serial ports allow the MicroTSCM to easily adapt into a digital environment