Manual Steel Series: 8-Inch Inline Steel Filter
Source: Amiad Water Systems
Steel filters feature filtration degrees range from 3500 to 50 micron, with various filter element types to suit different types of suspended solids
Click Here To Download:
•AutoCAD Drawing: 8-Inch Inline Steel Filter
Click Here For Information On Our 2009 Training Seminars
Click Here To Download:
•AutoCAD Drawing: 8-Inch Inline Steel Filter
Click Here For Information On Our 2009 Training Seminars
•AutoCAD Drawing: 8-Inch Inline Steel Filter
Click Here For Information On Our 2009 Training Seminars
Steel Filters feature:
- Corrosive Resistant: Phosphate pre-treated, polyester coated steel. Other coatings and housing materials are also available.
- Filtration Degrees range from 3500 to 50 micron, with various filter element types to suit different types of suspended solids.
- No tools required for maintenance.
- Pressure check points available for ease of determining filter cake build-up.
- Wide variety of flange connections (DIN, ASA, BSTD, JIS, etc.), to meet all international requirements.
- All standard filters are rated up to 10bar; 150psi.
| General data: | |
| Maximum flow rate | 1320 USgpm; 300m³/h |
| In-Out diameter | 8"; 200mm |
| Connection type | Flanges |
| Maximum pressure | 150psi; 10bar |
| Maximum temperature | 149°F; 65°C |
| Weight (Empty) | 143lb; 65kg |
| Volume | 20.3 USgal; 77 liters |
| Construction materials: | |
| Housing | Phosphate pre-treated steel 37-2 with polyester coating |
| Lid | SMC polyester |
| Seals | NBR |
| Weave wire screen data: | |
| Filter area | 887in²; 5720cm² |
| Materials | st.st. 316 |
| Perforated screen data: | |
| Filter area | 887in²; 5720cm² |
| Materials | st.st. 316 |
| Filtration degrees: | |
| Weave wire | 300, 200, 130, 100, 80 micron |
| Perforated | 3500, 2500, 1500, 800, 500 micron |
•AutoCAD Drawing: 8-Inch Inline Steel Filter
Click Here For Information On Our 2009 Training Seminars