GasPoint

The rugged GasPoint transmitter provides a 4-20 mA output signal which can be connected to any control system (DCS, PLC etc.). With advanced sensor technology and microcontroller based operation, the GasPoint provides continuous monitoring of hydrogen sulfide, carbon monoxide or combustible gases.

Gases Monitored:
Hydrogen Sulfide, Carbon Monoxide, and Combustibles (0-100% LEL)

Features

• Readout/Display Advises- Gas type monitored, Continuous (%LEL or ppm) readout of gas concentration, Alarm level and type encountered (LOW/HIGH or FAULT), When sensor has "failed" its automatic daily self-test, "Sensor Replacement" and "Sensor Expired" indications, Calibration mode prompt advises when to apply gas.
  
• Change gases monitored in the field at any time. The GasPoint Transmitter will recognize the Sensor installed, test and reset itself to that sensor type.
  
• Full function (auto) sensor integrity test continuously advises sensor gas sensing ability and when it's useful life is ended.
  
• Non-intrusive, One-person automatic calibration via simple external pushbutton
  
• Auto Zero and Auto Span
  
• Equipped with Three 5 amp relay contacts - two Gas Alarm Replay functions (Low/High), and Fault Alarm. Field selectable normally energized/de-energized and latching/non-latching alarm relay functions.
  
• Field programmable alarm levels
  
• Back light (auto) in low light conditions and alarm
  
• No junction box connection required.
  
• Daily Sensor Integrity Test (auto) monitors sensor operation, length of time sensor has been in service and advises when sensor requires replacement.
  
• Select or modify the Measuring Range using a simple dipswitch.

ICON Service Company, 19722 South Nicholas Avenue, Cerritos, CA 90701-7401. Tel: 562-809-3066; Fax: 562-865-5711.