Product/Service

Cerabar M PMP51

Source: Endress+Hauser, Inc.

Cerabar M PMP51

Pressure transmitter with metal sensor; With analog electronics or communication via HART, PROFIBUS PA or FOUNDATION Fieldbus.

Request Information

Click Here To Download:
Cerabar M PMC51, PMP51, PMP55 Datasheet

Pressure transmitter with metal sensor; With analog electronics or communication via HART, PROFIBUS PA or FOUNDATION Fieldbus.

Your benefits

 

  • Very good reproducibility and long-term stability
  • High reference accuracy: up to ±0.15%, as PLATINUM version: ±0.075% Turn down 100:1 End-to-end modularity for differential pressure, hydrostatics and pressure (Deltabar M - Deltapilot M - Cerabar M), e.g.
    • replaceable display
    • universal electronics
  • Easy commissioning without the need for an operating tool
  • Easy and safe menu-guided operation
    • on-site via display module
    • via 4 to 20 mA with HART
    • via PROFIBUS PA
    • via FOUNDATION Fieldbus
  • Used for process pressure monitoring up to SIL2, certified to IEC 61508 Edition 2.0 and IEC 61511 by TÜV NORD

 

The Cerabar M pressure transmitter is used for the following measuring tasks:

  • Absolute pressure and gauge pressure measurement in gases, steams or liquids in all areas of process engineering and process measurement technology level, volume or mass measurements in liquids
  • Process temperatures up to 130°C (266°F), for a maximum of 60 minutes 150 °C (302 °F)
  • High pressure up to 400 bar
  • International usage thanks to a wide range of approvals

 

Click Here To Download:
Cerabar M PMC51, PMP51, PMP55 Datasheet

Need More Information? Just Ask.

Click the button below to directly contact the supplier. Use it to:

  • Ask a question.
  • Request more detailed information or literature.
  • Discuss your current project/application.
  • Request a quote.
  • Locate a distributor in your area.
  • Schedule a demo.
Request Information