Bulk Container Mixers

Neptune Mixer Company has introduced a new line of gear-driven Bulk Container Mixers, designed to allow easy yet thorough mixing of materials in semi-bulk shipping containers. The mixers from Neptune are available in two styles: bung- or bracket-mounted with vertical motors for single containers (Series HGL, DT and RAB); and with a low-profile layout for stackable containers (Series RGT).

Series HGL (430 rpm) and the Series RAB (350 rpm) mixers are designed to mount to a 2-inch coupling or flange. Series DT (420 rpm) and the Series RGT (350 rpm) units can mount either directly to the tank or to an optional bracket.

The Series DT bracket is constructed of aluminum or steel and adjustable to containers ranging from 32 to 50½ inches wide. For the Series RGT, brackets are available to adapt the mixer to the following Intermediate Bulk Containers (IBCs): Clawson, Clean Earth, Hoover, Polyprocessing, Schultz, Snyder and Sonoco.

Motors available with Neptune’s Bulk Container Mixers include totally enclosed fan-cooled (TEFC) ranging from 1/3 to 1 HP, and air motors rated at 1/2 to 1 HP. Both the vertical-mount and low-profile styles are also available as explosion-proof models. Each Bulk Container Mixer features a folding propeller that is constructed of 316SS and is capable of fitting through a 2-inch opening; the prop’s operating diameter is 9 inches.

Neptune Chemical Pump Co., Inc., PO Box 247, Lansdale, PA 19446. Tel: 215-699-8700; Fax: 215-699-0370.