Batching System for Water Meters with Contact Head Registers
Illustration above is of two control model. Available with 1,2 or 3 Control Units (Timers or Counters). The Batch Controller can be used with any of our meters that incorporate contact head registers (pulse switches). Contact Head Meters are available in sizes from 1/2" Model 50C to 12" Model MMT Turbine Meters. Available in different gallons per contact that increases with meter size.
Operation as a Batch Controller:
Provides a means for automatically measuring the amount of water for a desired batch, and an actuating signal for the batch processing equipment to shut off the flow after the preset volume has passed through the meter. Eliminates the need for manual measurement and assures proper mixing each time in the desired amount. Includes a Predetermining Counter which works in conjunction with an electric contacting meter as illustrated above to measure the amount of water to be added to the batch. Features a batch start button which opens a valve or turns on a pump to start the batch. When the desired amount of water is used, the controller automatically turns the pump off or closes the valve completing the batch The amount of water added can be easily varied as needed or left the same for the next batch.
Cabinet:
The redesigned cabinet offers these important advantages: NEMA-12: dust-proof,waterproof and corrosion proof housing. Easier connection to the meter and devices you are controlling. Capacity for up to three control units.
Daniel L. Jerman Co., 275 Railroad Place, Hackensack, NJ 07601. Tel: 800-654-3733; Fax: 201-487-3953.