Thermo Scientific AquaSensors DataStick AquaClear Low-Range Turbidimeter
•Datasheet: AquaSensors DataStick AquaClear Low-Range Turbidimeter
•Brochure: AquaSensors Liquid Analytical Measurement Systems
The AquaClear drinking water turbidimeter is part of the DataStick family of products. The DataStick can be used with any sensor head by Thermo Scientific and can communicate directly with industrial computer systems using any of the communications adapters offered.
Thermo Scientific AquaSensors AV38 local display is provided as standard equipment for this system. It is, however, not required and any number of turbidity systems can be digitally networked to a single computer interface. Open protocol commands for calibration, configuration, diagnostics and measurement are available.
Markets/Applications
- Drinking water
- Filter monitoring membrane filtration
- Distribution monitoring
- Wastewater effluent (clarified)
- Packaged water systems
- Food & beverage process
- Pharmaceutical process water
Product Benefits
- Meets or exceeds USEPA method 180.1
- Pre-calibrated measurement
- Plug & play sensor heads
- Simple to operate
AquaSensors DataStick AquaClear Drinking Water Turbidimeter
For drinking water turbidity applications,
the DataStick uses a pre-calibrated plug-in,
optical detector. The DataStick is simply
inserted into a sample chamber specifically
designed to prepare water for turbidity
measurements.
The chamber removes bubbles from the water so that solid particles can be accurately detected. The chamber lamp will provide collimated white light for a minimum of three years and is easily changed.
Because the chamber is only 135 mL, it takes a very small amount of Formazin standard to perform EPA mandated calibrations.
Click Here To Download:•Datasheet: AquaSensors DataStick AquaClear Low-Range Turbidimeter
•Brochure: AquaSensors Liquid Analytical Measurement Systems