Amaprop - Submersible Mixer
Horizontal submersible agitator with self-cleaning ECB propeller, close- coupled design, equipped with coaxial spur gear, explosion protection to ATEX II G2 T3 or T4.
Design
Horizontal submersible agitator with self-cleaning ECB propeller, close- coupled design, equipped with coaxial spur gear, explosion protection to ATEX II G2 T3 or T4.
Applications
In environmental engineering, particulary for circulating, keeping in suspension and inducing flow in municipal and industrial waste water and sludges; in nitrification and denitrification tanks, activated sludge tanks, mixing tanks, final storage tanks, biological phosphate elimination tanks, flocculation tanks and in biogas applications.
Overview of technical data
|
Type of bearing |
Rolling element bearings |
|
Drive |
Electric motor |
|
Drive frequency |
50 Hz / 60 Hz |
|
Type of drive |
Electric motor |
|
Drive voltage |
Low voltage |
|
Connection to power supply |
230V; 400V; 500V; 690 V; 3~ |
|
Explosion protection |
ATEX II 2G T4; ATEX II 2G T3 |
|
Type of coupling |
Gear |
|
Type of lubrication |
Grease lubrication |
|
Max. permissible fluid temperature |
104 °F |
|
Pump set location |
Wet well |
|
Self-cleaning |
Yes |
|
eClass assignment |
36410000; 36410106 |
|
Installation position |
Horizontal |
|
Shaft seal type |
Mechanical seal |
|
Main applications |
Waste water / sewage |
|
Maximum drive rating |
8, 72 hp |
|
Type of installation |
Stationary |
|
Minimum propeller diameter |
2. 500 mm |
|
Maximum speed of rotation |
120 rpm |