AM-LINER II
After installation AM-Liner II forms a tight molded fit against the wall of the existing pipeline.
- AM-Liner II is manufactured from a polyvinyl chloride compound specially formulated for pipeline rehabilitation.
- AM-Liner II is resistant to all normal sewer effluents due to the superior chemical and flame resistant properties of polyvinyl chloride.
- AM-Liner II is manufactured to SDR 32.5 and SDR 26 to line sewer pipe from 6-inch to 12-inch diameter.
- AM-Liner II conforms to ASTM Standards F-1867 and F-1871.
Coefficient of Linear Thermal Expansion*.......ASTM-D696 4.17 X 10-5 in./in./°F
Tensile Strength..............................................ASTM-D638 3600 PSI Min.
Tensile Modulus..............................................ASTM-D638 155,000 PSI Min.
Tensile Elongation..........................................ASTM-D638 150% Min.
Flexural Strength.............................................ASTM-D790 4100 PSI Min.
Flexural Modulus.............................................ASTM-D790 145,000 PSI Min.
Specific Gravity...............................................ASTM-D792 1.28
IZOD impact....................................................ASTM-D256 1.2 ft. lbs./in Min.
Brittleness Point..............................................ASTM-D746 32.9 °F
American Pipe & Plastics Inc., Po Box 577, Binghamton, NY 13902. Tel: 607-775-4340; Fax: 607-775-2707.