Industrial Water & Wastewater Treatment Solutions
-
Water, Environmental, And Food & Beverage Analysis
2/16/2022
The One Stop Shop for Water, Environmental, and Food & Beverage Analysis with our trusted Supelco® products at your fingertips. Conducting water, environmental, and food & beverage analyses are complex, requiring numerous products and instruments. We created a NEW, easy-to-navigate catalog to help you quickly find everything required for your measurements. Organized by product type as well as by type of workflow.
-
GeoPlug Water-Stop
1/28/2022
GeoPlug water-stop should be applied when material becomes warm and putty like. Press material into patch area by hand or with trowel and hold until patch becomes hard. To stop in-filtration water, seal crack from top to bottom. Continue this process until the patch area is completely filled with GeoPlug water-stop.
-
GeoRoc®
1/28/2022
GeoRoc liner creates an integral nano polymeric structure that continues to react over time, resulting in continuous improved performance and strength. This product rapidly cures, which means that the rehabilitated structure can be quickly put back into service after its GeoRoc liner application. GeoRoc liner can also be used in new construction projects as a replacement for OPC as well as high-performance cement mortars.
-
GeoStrong Concrete Repair Mortar
1/28/2022
GeoStrong Repair Mortar is a one-component, non-shrink, fast-setting geopolymer mortar designed for repairing horizontal, vertical and overhead concrete surfaces where high strength is desired.
-
GEOSPRAY ® 61 Geopolymer Mortar
1/28/2022
The GeoSpray® 61 system is designed for multiple application techniques, including pouring, placing, troweling, spraying, and centrifugal casting.
-
Automatic Scraper Strainers Protect Critical Membrane Systems
1/19/2022
Automated scraper strainers pre-filter water and wastewater to protect fragile membrane systems from damage caused by large, suspended particles, reducing maintenance and replacement costs.
-
GEOSPRAY Geopolymer Mortar
1/10/2022
Unlike other cementitious liners, the unique GeoSpray mortar chemistry provides superior flexural and compressive strength, as well as ultra-low porosity and high self-bonding which eliminates cold joints.
-
Thermal Flow Meters Help Electric Power Plants Keep Their Cool With Hydrogen Gas
12/20/2021
In all electric power generation plants (gas, solar, coal or nuclear), the fuel source of choice heats a large boiler, which creates steam that drives turbine blades to rotate. The turbine shaft in turn spins magnets inside the generator, which induces an electrical current in a coil of wires. It’s a high-temperature process both in terms of the boilers and steam, but also at the back end of the process where the electric current generates a large amount of heat that must be managed in order to keep the generator’s wire coils cool enough to avoid degradation or failure. Depending on the MVA size of the generator, hydrogen (H2), air or water is typically used to provide cooling.
-
Refinery Improves Boiler Air-To-Fuel Mixture Performance With Help From Multipoint Thermal Flow Meter
12/20/2021
A major oil refinery’s plant team ran into challenging issues when they attempted to optimize their large primary boiler system, which initially perplexed the plant’s process engineers. After extensive study, it was determined there was a problem controlling the boiler’s burner air-to-fuel mixture ratio.
-
Textile Manufacturing
10/29/2021
The textile manufacturing industry encompasses many and diverse processes that rely heavily on the use of water, energy, chemicals, and other resources. Wet spinning, sizing, desizing, scouring, bleaching, mercerization, dyeing and printing are just a few. Monitoring and controlling the pH, TDS/Conductivity/Salt Concentration, ORP (REDOX), and Temperature of the aqueous solutions used in these processes conserves costly resources, controls quality, and reduces the amount of pollution that must be treated before discharge of effluent wastes. This can be done manually with handheld instruments or automatically with in-line monitor/controllers.