Hot Products
-
CT5100 Continuous Gas Analyzer
5/26/2016
Rosemount CT5100 continuous gas analyzer from Emerson is the world’s only hybrid analyzer to combine Tunable Diode Laser (TDL) and Quantum Cascade Laser (QCL) measurement technologies for process gas analysis and emissions monitoring. The CT5100 is available in two variants: a certified system, housed in a purged and pressurized enclosure for hazardous area installations; and a non-certified system for use in nonhazardous areas. Both can house up to six lasers to measure up to 12 critical component gases and potential pollutants simultaneously within a single system - meeting local, state, national, and international regulatory requirements. The CT5100 is a unique combination of advanced technology, high reliability, and rugged design. Its "laser chirp" technique expands gas analysis in both the near- and mid-infrared range, enhancing process insight, improving overall gas analysis sensitivity and selectivity, removing cross interference, and reducing response time. The laser chirp technique produces sharp, well-defined peaks from high resolution spectroscopy that enable specificity of identified components with minimum interference and without filtration, reference cells, or chemometric manipulations.
-
1066 Liquid Analytical Transmitter
6/29/2012
This loop-powered analytical unit serves industrial, commercial and municipal applications with the widest range of liquid measurement inputs available for a two-wire liquid transmitter.
-
SC311 Infrared Combustible Gas Sensor
1/10/2017
The SC311 delivers the latest technology advancements in infrared sensing of flammable gases in a rugged package designed for the most extreme industrial environments. Hydrocarbon gas LEL detection is fast, reliable and highly accurate with only periodic bump testing recommended and a simple annual calibration sequence. A full 5 year warranty is included with a typical sensor life of 8-10 years.
-
Water Quality Monitoring: Clarity II™ Turbidimeter
8/30/2005
The Clarity II turbidimeter is intended for the determination of turbidity in water. Low NTU measurement capability, efficient bubble rejection, and easy calibration make Clarity II ideal for monitoring the turbidity of filtered drinking water
-
Disinfection: TCL Total Chlorine Analyzer
8/30/2005
Total chlorine measurement is essential in the control of chlorine in water before its return to the environment in a wide range of industrial applications including desalination. It also provides accurate reporting to the EPA about that control. To meet EPA requirements, the instrument must be reliable for long periods of time and monitor down to 500 ppb. The Rosemount Total Chlorine Measurement system from Emerson meets and exceeds all requirements while saving money through the use of low-cost reagents.
-
Water Quality Monitoring: Multiparameter Water Quality System
10/12/2005
The Multiparameter Water Quality System provides one of the most efficient solutions for the continuous on-line measurement of pH, ORP, conductivity, temperature, free chlorine, total chlorine, monochloramine, and oxygen
-
pH: 3900 pH Sensor
1/24/2011
The newly released 3900 general purpose pH/ORP sensor is designed to meet the broadest range of applications in the industry. It has the widest temperature operating range of any general purpose sensor and is the first to function at sub-zero temperatures, providing accurate measurements in applications from -10 degrees C to 100 degrees C.
-
Disinfection: MCL
8/30/2005
The MCL monochloramine system is intended for the determination of monochloramine in fresh water
-
Dissolved Oxygen: 499ADO
8/30/2005
The 499ADO sensor is intended for the continuous determination of dissolved oxygen between 0-20 ppm. The primary application is aeration basins in municipal and industrial wastewater treatment plants
-
Desalination Of Sea Water
4/4/2006
Desalination is the name given to processes that remove salt from water