2537 Rotor-X Paddlewheel Flowmeter
The NEW Signet 2537 Flow Sensor is the next generation in fluid measurement technology from the inventor of the original paddlewheel flowmeter
LATEST IN:
Flow Control and Measurement
PRODUCTS
-
-
Electromagnetic Flowmeter ProcessMaster ProcessMaster is designed specifically to meet the increased requirements on advanced flowmeters. The modular design concept offers flexibility, cost-saving operation and reliability whilst providing a long service life and exceptionally low maintenance.
-
Model 4200 Gas Vacuum Chemical Feeder The JCS Industries Model 4200 Gas Vacuum Chemcial Feeder mixes and feeds gaseous chemicals commonly used for water and wastewater disinfection accurately, reliably and safely.
-
Argonaut-SW® The Argonaut-SW® is a self-contained, compact unit used for measuring water flow, velocity, and level. Typically used in canals, pipes, and natural streams, the SW is designed to account for velocity variations within the channel to produce accurate flow calculations
-
Instrumentation: OPTIFLUX 1000 Electromagnetic Flow Sensor The OPTIFLUX 1000 electromagnetic flow sensor is an economical solution for a wide range of applications. The flowmeter can be used in applications (including various aqueous solutions), where other measurement techniques were previously used.
WHITE PAPERS AND CASE STUDIES
-
Case Study: Accurate, Continuous Flow Measurement Ensures Efficient Use Of Irrigation Water It is estimated that Spain has approximately 40,000 Hm3/year of available water, which would normally be regarded as sufficient. However, irregular weather patterns and contrasting geographical areas result in serious water shortages. For example, the Southern and Central Mediterranean river basins represent 41% of Spanish territory and accommodate 37% of the population, but only benefit from 19% of the total water resources
-
Digester Biogas Flow Measurement The engineers at a municipal wastewater treatment utility were expanding their biogas digester system and were seeking an improvement over their existing, maintenance-intensive flow metering technology. They needed to measure the amount of gas contained within a gas bag as well as the flow rate of the gases traveling from the gas bag system into a co-generation power system
-
Town Of Chalk River, Ontario Water Filtration Plant Upgrade – Success Story
The Corporation of the Town of Chalk River was mandated under current legislation to upgrade their existing water filtration plant providing water for the residents of the town of Chalk River.
-
Case Study: V-Cone Flow Meters Solves Nuclear Lab Underwater Measurement Problem A research facility located in the Netherlands, NRG Laboratory, produces nuclear medical isotopes. They conduct tests on materials for nuclear power plants
-
Case Study: A New Generation Of Filling Control Systems The filling control technology employed in bottling machinery has evolved over the past decade, offering higher levels of accuracy and reproducibility, while achieving extremely high reliability
SUPPLIERS
-
Mass Transfer Systems Since 1984, Mass Transfer Systems (MTS) has been supplying jet aeration and mixing systems to industries and municipalities throughout the world. The majority of our product consist of "engineered systems" for biological and other waste treatment processes and a variety of industrial mixing applications
-
McCrometer, Inc. McCrometer is a global leader in providing flow measurement solutions including differential pressure (DP), electromagnetic, and propeller technologies. McCrometer’s flow measurement solutions are found in thousands of installations worldwide including Municipal/Industrial Water & Waste, Agriculture and Turf Irrigation, Institutional Facilities applications and many more
-
YSI, a Xylem brandYSI offers a full line of environmental monitoring and sampling instruments, systems, and services for water quality and water velocity data. Our multiparameter instruments, aquaculture monitoring systems, handheld sampling instruments, and complete line of SonTek products can be incorporated into any of your monitoring or sampling applications.
-
Emerson Process Management, Rosemount AnalyticalRosemount Analytical, one of Emerson’s leading process management companies, is the world’s premier supplier of technologies for liquid and combustion analysis, process analysis, gas measurement, and emissions monitoring. With an 80-year legacy of manufacturing liquid and gas analytical products that have revolutionized the process industries, we continue to provide real, quantifiable analytical solutions.
-
Ashcroft Inc. Ashcroft Inc. is a leading manufacturer of commercial and industrial pressure and temperature measurement instrumentation. Best known for the product brand names Ashcroft®, Heise® and Weksler®, Ashcroft Inc. offers a full line of mechanical and electronic instruments. Serving a wide variety of industries and applications, the product offering includes thermometers, switches, transducers, transmitters, instrument isolators and calibration instruments
VIDEOS
-
Flygt APP 800 Pump and Process Controller by Xylem Video
Introducing the Flygt APP 800 pump and process controller. The APP 800 controller puts complete control at your fingertips, thanks to an intuitive graphical user interface and greater flexibility to control functionality and adapt communications. This translates into maximum uptime, minimal costs for installation, operation and maintenance, and greater energy savings, which boost your bottom line.
-
McCrometer Introduces Company's Flowmeters At ACE Melissa Aquino of McCrometer introduces a selection of the company's flowmeters on display at the AWWA 2010 ACE event — including a hot-tap installed mag meter spanning the entire diameter of pipe for greater sensor accuracy and an advanced differential pressure flowmeter system McCrometer’s patented V-Cone technology.
-
Endress+Hauser Company Portrait Video Endress+Hauser is recognized as a leading supplier of industrial measurement and automation equipment, providing services and solutions for industrial processes all over the world.
-
FPI Mag Insertion Flow Meter VideoVisit our new Web Demo to discover how the FPI Mag™ (Full Profile Insertion) Flow Meter can deliver performance that rivals a full-bore mag meter with the ease of hot tap installation.
-
Video: Variable Area Flowmeters Variable area flowmeters from KROHNE offer not only the maximum possible accuracy but also maximum reliability.
ABOUT
FLOW CONTROL AND MEASUREMENT
Flow measurement can be defined as quantification of the movement of water in a given channel. Flow can be measured either by determining the displacement and/or Velocity of the water. Water meters usually control measure and display total usage in cubic meters, on either mechanical or electronic registers.
Flow can be divided into two main flows which are: Open channel flow and Closed conduit flow. Flow is controlled by use of valves at intervals to either to slow down, allow faster flow or completely shut down the flow. Some water meters usually perform both the function or making readings and controlling flow while others just conduct measuring only.
Meters for reclaimed water contain special lavender register covers show that the water is non-potable. Velocity-type meters measure the velocity of flow through a meter of a known internal capacity. The speed of the flow can then be converted into volume of flow for usage. Since Multi-jet meters are usually very accurate in small sizes they are normally used for residential and smaller commercial uses. Turbine meters are not as accurate as jet meters and displacement meters at low flow rates.
A compound meter is used where high flow rates are necessary. Magnetic flow meters are a velocity-type water meter, except that they use electromagnetic properties to determine the water flow velocity. In water treatment plants, measurement and control devices can be installed in the following locations: within interceptors or manholes, the head of the plant, in the force mains that lead to main tanks etc. Automatic Meter Reading has compelled producers to build pulse or encoder registers to provide electronic output for radio transmitters, reading storage devices, and data logging devices.
NEWS
-
GF Piping Systems Introduces Ultrasonic Flow Measurement/Logging Systems With Uninterrupted Process Installation And Operation GF Piping Systems has added an Ultrasonic Flow Measurement and Logging Family to its extensive line of flow and analytical measurement instrumentation.
-
FCI To Feature Breakthrough ST100 Flow Meter At WEFTEC 2011 Visitors to WEFTEC 2011 will have the opportunity to learn more about the breakthrough ST100 Flow Meter from Fluid Components International (FCI), the new industry benchmark in process and plant gas mass flow measurement.
-
Xylem’s Next-Generation Pump Controller Provides Clear View Of Energy Usage
Xylem Inc., a leading global water technology company focused on addressing the world’s most challenging water issues, has launched a next-generation pump controllerthat provides a clear view of a plant’s energy consumption and the true cost of pumping operations.
-
Wastewater Treatment Aeration System Case Study Shows How To Reduce Compressed Air Energy Costs Fluid Components International (FCI) has released a new Wastewater Treatment Aeration System Case Study, which offers valuable tips on how operators can reduce their compressed air energy costs by installing precision air/gas flow measurement instrumentation.
-
ST100 Gas Flow Meter Adapts To Process Automation & Communication Strategy San Marcos, CA — The future-ready ST100 Series Air/Gas Mass Flow Meter from Fluid Components International (FCI) ensures wastewater treatment and water treatment process engineers and operators, and their consulting engineering firms, the greatest ability to interface with any existing control system communications, as well as the ability to adapt to a proposed change in the communications.