IPEC PRODUCTS

CLT - In-Channel Screens

CLT Series of In-Channel Screens, from IPEC Consultants, are designed for in-channel placement and include the following models: the CLT, a shaftless screw conveyor with compactor; and the CLT-A, a shaftless screw in-channel screen with compactor and agitator

IFO - Internally Fed Screen - Overhung

IFO Series of Internally Fed Rotary Screens, from IPEC Consultants, have cylindrical drums mounted horizontally on four shaft-mounted wheels. The drum rotates at 4-5 rpm and is driven by a top-mounted, TEFC motor, geardrive, stainless steel chain and sprocket

IFS - Internally Fed Screen

The IFS Series of internally fed rotary screens have cylindrical drums mounted horizontally on four shaft-mounted trunnions that are supported on pillow block bearings.

TLT- Tank Mounted Screen

TLT Series of Screens, from IPEC Consultants, are a stand alone primary screening unit. Similar in operation to the CLT series of in-channel spiral screens. The TLT is typically installed above ground, for the screening of pumped wastewater streams. The effluent is completely enclosed in a stainless steel tank that is supplied with access covers.

FEATURED ARTICLES

• 

  Matt Brewing — Spent Hops Screening And Dewatering

  An internally fed rotary screen with wedgewire drum featuring 0.020” screen slot openings is applied to screen 900 GPM of brewery wastewater and remove spent hops while letting yeast pass through to reach the anaerobic digester.

• Durango Wastewater Treatment Plant Foils Energy Heist And Lowers Maintenance Costs

  The Durango wastewater treatment facility is a traditional waste-activated system. The bio-solids (WAS) is collected from secondary clarifiers, treated with flocculants and thickened before an anaerobic digestion. A centrifuge had been used for the thickening process which dewatered the WAS to a 8 to 10% consistency. The plant had three 50 hp units and used either one or two of the units as needed

• 

  Case Study: Wastewater Treatment Plant Protecting Wilderness With Membrane Bioreactor Technology

  When it came time to design a new wastewater treatment plant for Field, the seasonal rise in population during the summer months added to the challenge of meeting Parks Canada's stringent mountain effluent targets. The goal of the new wastewater treatment plant was to protect this pristine wilderness area by setting the effluent target as close as possible to the natural composition of the receiving water bodies. With this in mind, Parks Canada reviewed the latest in advanced treatment technology and opted for a membrane bioreactor system

• 

  Be A Detective: 5 Must-Ask Questions For Industrial Screening Selection

  Sherlock Holmes and Bert Irwin have something in common: they both spend their days looking for clues.

• 

  Application Note: IPEC Replaces Failed Screen At Beef Processing Plant

  A Midwest beef slaughter operation, which processes 550 head of cattle per day, had installed wedge wire screening ahead of their DAF to reduce the solids loading to the flotation unit. By IPEC

• 

  How Chemistry And Mechanics Deliver Cost-Effective Waste Treatment

  Polymer chemistry is one of the leading considerations when designing a sludge thickening system. The right polymer chemistry contributes to more effective thickening at a lower cost. However, the right chemistry must also be complemented by mechanical processes that enable the chemistry to work effectively. Waste treatment equipment manufacturer IPEC collaborated with polymer suppliers for extensive lab trials to design a waste activated sludge (WAS) thickening system for the City of Brockville, a city of more than 23,000 people located in the southeastern part of Ontario, Canada. The rotary drum system is capable of thickening 5.25 I/second of 0.55 percent municipal sludge to up to 7 percent solids.