Sauereisen's Full Line Products Used To Rehabilitate Over 300 Manholes For The City Of Bristol, CT
Pay Dirt in Bristol, CT
In the Spring of 2000 Sauereisen began a relationship with Environmental Preservation Systems, Inc. of Rome, NY. This company specializes in manhole rehabilitation, primarily installing cementitious systems. Epoxies and other resinous-based products had always proved to be very difficult and costly for them to install in manholes. Ray Ruszkowski, President of Environmental Preservation Systems, became interested in the Sauereisen system because the "60-Minute Solution" appeared to offer him the ability to apply an epoxy system as easily as he installs cementitious products. To continue his success in manhole rehabilitation Ray felt it was necessary to offer a wider range of products to meet the ever-increasing demands of this growing market.
Seeing is Believing
Ray Ruszkowski visited Sauereisen headquarters
in Pittsburgh and was taken to a local municipality
to see completed work and inspect their equipment
set up. We then arranged a demonstration at
Ray's shop in Rome, NY using a combination of
his 4 HP Rotor/Stator Pump and a special spinning
nozzle from RFI Construction Products, to
successfully apply all Sauereisen materials. Ray
was convinced. Not only could he pump both
cementitious products and epoxy SewerGard
No. 210RS; the RFI nozzle enabled him to apply
the products much more efficiently than the straight shot nozzle he was currently utilizing. In
addition, it would be safer for his crews who would
now spend far less time inside the manhole.
A Perfect Match
The Maguire Group, an engineering firm in New
Britain, CT had issued specifications for
rehabilitating over 300 manholes for the City of
Bristol, CT. The specifications called for a minimum
3/8-inch cementitious resurfacer to rebuild brick
manholes and an epoxy topcoat to protect them from
corrosion. Working with Environmental
Preservation Systems and the general contractor from
MA, Sauereisen submitted a full line of rehabilitation
products, including InstaPlug F-180, Hydroactive
Polyurethane Grout F-370, SubstrateResurfacer
F-121 and SewerGard 210RS. Case history, product
data information, along with a presentation of
Sauereisen's overall history and wastewater
experience were enough to win approval of the
products.
Application Moves Rapidly and Efficiently
When the project commenced Sauereisen personnel
were on hand to provide training and technical
service. A three-stage operation was set up. The
crew pressure washed, addressed active leaks and
made repairs. After this was completed in a series of
manholes, the crew installed SubststrateResurfacer
F-121 to a minimum 3/8-inch in one pass using their
4 HP pump and RFI spinning nozzle. They then followed with SewerGard 210RS using similar
equipment. Environmental Preservations'
product efficiency increased rapidly. In a matter
of days they were averaging 15 to 20 manholes
per day; pressure washing and installing
SubstrateResurfacer followed by the application
of SewerGard RS. The entire crew was very
appreciative of the drastic reduction in the
amount of time spent inside the manhole. Ray
felt that this factor contributed to their
productivity and quality of work. The engineer
maintained an inspector on site at all times to
insure that surface preparation and materials
thickness was always in accordance with the
specifications and expressed his satisfaction to
Sauereisen.
Success Guarantees New
Opportunities
The success of this application will afford new
opportunities for us, our agents, and contractor
base. The engineer has specified Sauereisen for
two more projects in Connecticut. Environmental
Preservation Systems is promoting the "60-
Minute Solution" in municipalities they do
business with on a regular basis. In addition,
Environmental Preservation is so pleased with the
performance and ease of application of the
SubstrateResurfacer, they have placed an order to
line 8,500 vertical feet of manholes with ½-inch
of the product.