Pro-OX 7500 Commercial Iron Filtration Systems
Flow Rate: Refers to maximum recommended Gallons Per Minute ("GPM") which means how fast the water is flowing. The 1.5 CF model works best for most homes (such as 2 -3 bathroom homes with 2 - 6 persons). However for homes with 2 - 4 persons, the 0.75 or 1.0 CF models work great.
Commercial Use: If you are filling a storage tank or running the filter for hours at a time or for commercial use (landscaping, community systems etc), we recommend divide flow rate by 50%.
Have Questions? Call 888-600-5426 and speak to one of our certified water treatment technicians for technical help or if you have questions about sizing or flow rates.
Removal Rate: Removes up to 30 PPM iron, 15 PPM manganese, 10 PPM hydrogen sulfide (optional chlorine feed may be needed for extremely bad water).
Iron levels over 5 PPM, or when manganese or other conditions such low pH, high levels of sulfur odor or iron bacteria or tannins, please note that additional treatment such as chlorine, peroxide, or aeration may be needed.
Manganese removal: when manganese is present, we recommend a chlorine feed. A chlorine feed with a contact/retention tank allowing 30 seconds of time after the chlorine has been injected, followed by the Pro-OX filter systems does a GREAT job on removing manganese. A carbon filter can be used after the Pro-OX system to remove any residual chlorine.
Hydrogen Sulfide Rotten Egg: if hydrogen sulfide is present and the water also contains iron, we recommend an Air-Charger Pro-OX system. If the hydrogen sulfide levels are over 5 PPM, we recommend a chlorine feed, and/or aeration prior to the Pro-OX system. Please contact us for more information if you need assistance.
"CF" refers to the amount of filter media blend in cubic feet. A 1.5 CF has 1.5 cubic feet of filter blend media (Pro-OX, Zeolite and filter gravel).