By Dr. Robert Smith, Sarah Elger, and Scott Mleziva, YSI, a Xylem brand
Solids Retention Time (SRT) is a critical activated sludge design and operating parameter. The selection of an SRT has many consequences related to process performance, sludge production, and oxygen requirements. The traditional method for controlling SRT is to manually adjust the sludge wasting rate based on the food-tomicroorganism (F/M) ratio or mixed liquor suspended solids (MLSS) concentration. The effectiveness of closed-loop control of SRT has been demonstrated in many locations. In addition to reducing variability in actual SRT, other benefits cited include reduced foaming, improved sludge settling characteristics, improved performance of downstream sludge thickening, and fewer laboratory process control measurements. Automated SRT control is likely to be of great benefit for overloaded or nutrient removal facilities. However, a big reason that automated SRT control is not more widely practiced is that many operators and engineers fear that a malfunction or misapplication of the control system will lead to a process upset. A better understanding of the proper application of SRT control is needed.