Amarex N - Small Submersible Waste Water Pump
Amarex N pumps are floodable, single-stage, single-entry close-coupled pump sets which are not self-priming.
Design
Vertical, single-stage submersible motor pump, for wet installation, stationary and transportable design. Amarex N pumps are floodable, single-stage, single-entry close-coupled pump sets which are not self-priming. Explosion-proof design available (ATEX, FM, CSA).
Applications
Handling of all types of waste water, especially untreated sewage containing long fibres and solid substances, fluids containing gas/air, as well as raw, activated and digested sludge; Removing waste water from flooded rooms or surfaces.
Overview of technical data
|
Type of bearing |
Rolling element bearings |
|
Drive |
Electric motor |
|
Drive frequency |
50 Hz / 60 Hz |
|
Type of drive |
Electric motor |
|
Drive voltage |
High voltage |
|
Connection to power supply |
400 V, 3~ |
|
Explosion protection |
EX- SCHUTZ EEX D IIB;ATEX 100A |
|
Type of installation |
Close- coupled |
|
Type of coupling |
None |
|
Type of lubrication |
Grease lubrication |
|
Pump set location |
Wet well |
|
Shaft material (EN standard) |
1. 4021 |
|
Casing material (EN standard) |
JL 1040 |
|
Free passage |
100 mm |
|
Maximum head |
160, 76 ft |
|
Installation position |
Vertical |
|
Shaft seal type |
Mechanical seal |
|
Main applications |
Waste water / sewage;Industry and process engineering;Building services |
|
Casing material |
Cast iron |
|
Maximum drive rating |
5, 63 hp |
|
Type of installation |
Stationary; Transportable |
|
Maximum flow rate |
190 m³/h |