Product/Service
FLEX-900® Flexible Ball Joint
Source: EBAA Iron Sales, Inc.
The FLEX-900® is designed for deflection application. It is perfect for field fabricating "river crossing" pipe from standard mechanical joint or flanged pipe.
Click Here To Download:
•Brochure: FLEX-900® Flexible Ball Joint
The FLEX-900® is designed for deflection application. It is perfect for field fabricating "river crossing" pipe from standard mechanical joint or flanged pipe.
•Brochure: FLEX-900® Flexible Ball Joint
•Brochure: FLEX-900® Flexible Ball Joint
The FLEX-900® is designed for deflection application. It is perfect for field fabricating "river crossing" pipe from standard mechanical joint or flanged pipe.
Available in sizes 3 inch through 48 inch and 72 inch.
Features and Applications:
- Sizes 3 inch through 36 inch
- For Ductile Iron Pipe, AWWA PVC Pipe, Steel Pipe and HDPE Pipe
- Constructed of ASTM A536 Ductile Iron
- 15 degrees to 20 degrees of deflection depending on size
- Each unit tested to rated working pressure prior to shipment
- No Periodic maintenance required
- Seals conform to applicable requirements of ANSI/AWWA C111/A21.11
- End Connections:
- Flanged Joint: 3 inch through 36 inch
- Mechanical Joint: 3 inch through 24 inch
- Combination of two joints available
- Flange outlets conform to dimensional requirements of ANSI/AWWA C110/A21.10 (Class 150) with addition of an O-ring gasket
- Mechanical Joint end conform to dimensional requirements of either ANSI/AWWA C111/A21.11 or ANSI/AWWA C153/A21.53
- Fusion Bonded Epoxy (FBE) Coated
•Brochure: FLEX-900® Flexible Ball Joint
Need More Information? Just Ask.
Click the button below to directly contact the supplier. Use it to:
- Ask a question.
- Request more detailed information or literature.
- Discuss your current project/application.
- Request a quote.
- Locate a distributor in your area.
- Schedule a demo.
