Wastewater Management Products

  1. HSF 250 Patriot Series Line Stop Fitting
    9/1/2017

    The re-designed 4-12 inch Hydra-Stop HSF 250 Patriot Line Stop fitting is a step forward in line stopping technology. Installed at pressures up to 250 psi, the HSF 250 line stop fitting delivers benefits, which save time, increase safety, and eliminates up to 100% of the costs associated with system shutdowns.

  2. 16" IVP 250 Insertion Valve
    9/1/2017

    The 16” IVP 250 from Hydra-Stop is the next generation of permanent, insertable gate valves offering increased strength, improved performance, and simplified installation and operation.

  3. Hydra-Stop 10 and 12 inch Insta-Valve 250 Insertion Valves
    9/1/2017

    The new 10 and 12 inch Insta-Valve 250 Patriot insertion valves from Hydra-Stop incorporate integrated design features which deliver superior performance and ease of installation.

  4. Orenco Sewer
    7/21/2017

    Wastewater Collection System

    Orenco Sewer™ (effluent-only sewer) is a cost-effective, environmentally sound wastewater collection system. With an Orenco Sewer, raw sewage flows from a house or business to a watertight underground tank. Only the filtered liquid portion is discharged (by either pump or gravity) to shallow, small-diameter collection lines that follow the contour of the land. Solids remain in the underground tank for passive, natural treatment and only need to be pumped every 10 to 12 years (depending on the number of residents and the tank volume).

    Orenco Sewers take significantly less time to install than conventional sewers. And in an Orenco Sewer, material and excavation costs are reduced because the inexpensive collection lines are shallowly buried just below the frost line. Because only liquid is being pumped, system designers don’t need to worry about minimum velocities and associated grades. This simpler installation process causes less disruption to communities and allows businesses to operate normally during construction.

  5. H-306HP Fabricated Steel Tapping Sleeve
    6/12/2017

    Mueller Co. recently announced a new H-306HP fabricated steel tapping sleeve. Designed for hot tapping ductile iron pipe and thick-wall C900 plastic pipe, the H-306HP is made from A36 fabricated steel and meets the requirements of AWWA C223. It features an integral bolt flange, Rilsan nylon coating, working pressures up to 300psi, and is available sizes from 4”-16”. The H-306HP is an economical tapping sleeve ideally suited for use with Mueller® CL-12, C1-36, and Mega-Lite drilling machines in less corrosive soil environments.

  6. Introducing Capital Controls® MicroChem®3
    5/24/2017

    From the experts in chlorine management comes a multi-parameter water analysis system offering both chlorine measurement and control in one versatile instrument. Tailor the modular MicroChem®3 to your individual application with up to three measurement parameters. Designed with extensive customer input, the easy and innovative system includes an intuitive touchscreen display, menu-driven software to easily guide users through set-up and operation, and a USB interface for software updates and data log downloads.

  7. Degas Separators And Degas Relief Valves
    5/19/2017

    The GDT™ Degas Separator is a patented centrifugal vortex unit that separates entrained and stripped gases from liquid (water) based on the density difference between the gas and liquid. Its unique compact design quickly and effectively separates unwanted entrained gases — such as ozone, chlorine, or methane — and requires far less space than traditional gas separators. It enables gas separation with pressure differentials of 5% or lower and at varible flows. The self-cleaning design significantly reduces maintenance and downtime, and it includes no moving parts that can wear out, break down, or require service.

  8. Multiple Parameters; One Simple Panel
    5/17/2017

    The Swan AMI DIST series offers three options for measuring chlorine, pH, conductivity and Turbidity on one easy to install, easy to maintain panel.

  9. PowerXL® Enclosed VFDs – The Next Generation In Energy Efficiency
    4/26/2017

    PowerXL enclosed drives is a Next Generation enclosed drives platform that packages Eaton’s PowerXL DG1 drive into a new and innovative solution. A common assembly design used across 9 million pre-engineered standard configurations delivers an easy-to-use product with industry best lead times. Add in the flexibility of custom engineered configurations and the reliability of a UL 508C design and an ISO 9001 manufacturing process, you get the most versatile, fast and reliable product on the market.

  10. Enclosed Industrial Clean Power VFDs – Controlling Water Everywhere It Goes
    4/26/2017

    Moving water and controlling water systems is no easy task. There are many variables involved with fluid dynamics, the addition of environmental, harmonics and energy cost concerns make system control even more difficult. Eaton understands these problems and provides enclosed drives solutions for water/wastewater. From NEMA 4X enclosures to our Active Energy Control algorithm and five-year warranty, Eaton provides a complete solution for water/wastewater applications.